T E C H N I C A L E D U C AT I O N
G R O U P P R E S E N T S
Coff ee Center
Removing the Coff ee Center Chassis
Y O U ' L L N E E D
Assorted Torx Drivers
Phillips Head Screwdriver
M O D E L S
MCA15NA Ariston™ Coff ee Center
MCA15APNA Ariston™ Coff ee Center
Q U E S T I O N S ?
Westland Sales
15650 SE 102nd Ave. (PO BOX 427)
Clackamas, OR 97015
Telephone: 877-356-0766
Service Fax: (503) 722-9202
Service E-mail:
service@aristonamerica.com
Re-mounting the Flow Meter Housing
Problem:
Coff ee Center displaying a 'CLOSE DOOR' fault
Solution:
Re-mount the Flow Meter Housing
1.
With unit OFF and unplugged
from power and water sources,
remove coff ee center chassis
(see supplemental instructions).
Next, squeeze button to open
Access Door.
2.
Remove the two Size 10 Torx
Screws that secure the Rear
Panel to the back of the unit.
3.
Remove the Rear Panel by
pulling upwards then toward
the rear of the unit.
Hose
Fig. 4-1
4.
Locate Flow Meter Housing. Remove wire harness from
Harness Clip. Remove Flow Meter Connector from Flow Meter.
Remove hose from left side of Flow Meter Housing.
© C o p y r i g h t 2 0 0 6 , W e s t l a n d S a l e s , C l a c k a m a s , O R 9 7 0 1 5
Harness Clip
Clip
Access Door Button
Flow Meter
Connector
Clip
Flow Meter
Housing
Page 1 of 2
Need help?
Do you have a question about the MCA15NA and is the answer not in the manual?
Questions and answers
We have the Ariston MCA15PNA coffee machine. It is stuck in ventilate but won't ventilate. How do we fix it. Also we need a new quick connect fitting.