Connecting To Remote Systems - Hayward HeatPro® Owner's Manual

Connecting to Remote Systems

Most HAYWARD heat pumps are compatible with one or more of the remote systems in the pool
and spa industry. The single mechanical thermostat units are compatible with the Jandy AquaLink,
Compool, and Hayward remote systems, but are not compatible with the Intermatic or Jandy
AquaSwitch remote systems. The dual mechanical thermostat units and all of the digital thermostat
units are compatible with all known remote systems in the industry. Note: HotSpot and Lil' HotSpot
models require special connections. The HAYWARD engineering staff can advise you on methods
of connecting remotely.
Examples of connecting with three popular remote systems are listed below. Thoroughly read the
installation instructions of the remote system before connecting to your heat pump.
A.
The diagram below shows how to connect HAYWARD single/dual mechanical and all digital
thermostats to the Jandy AquaLink:
Heat Pump Pool / Spa Heater Owner's Manual
Note: on units with
optional cooling modes, the
Aqualink controls only
heating cycles.
31