Factory Default Settings - NETGEAR MBR1516 User Manual

Factory Default Settings

Use the Restore Factory Settings button located on the bottom of your router to reset all
settings to their original factory default settings. This is called a hard reset. To perform a hard
reset, press and hold the Restore Factory Settings button for 6 seconds. Your router
returnx to the factory configuration settings that are shown in the following table.
Feature
Router User login URL
login
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local LAN IP
network
Subnet mask
(LAN)
RIP direction
RIP version
RIP authentication
DHCP server
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Daylight saving time adjustment
Firewall Inbound communication from the
Internet
Outbound communication to the
Internet)
Source MAC filtering
Mobile LTE Broadband 11n Wireless Router MBR1516
Supplemental Information
Default Behavior
http://192.168.0.1
admin
password
Use default address
1500
AutoSense
www.routerlogin.net
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
192.168.0.254
Disabled
PST for North America
Enabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
99