LaCie 301300U - Ethernet Disk NAS Server User Manual page 57

LaCie Ethernet Disk
User Manual
6.
When you see the words "5. Ready" displayed in bold, click
Shutdown (Fig. 75).
7.
When prompted, disconnect the USB CD-ROM drive, and
restart the system by pressing the power button on the front
of the Ethernet Disk.
IMPORTANT INFO: The system will put itself through a num-
ber of reboots; DO NOT interrupt the system during these re-
boots.
After the final reboot
LaCie Ethernet Log On Screen
When the Ready Light on the front of the Ethernet Disk comes on,
the restore process is complete.
8.
Use the LaCie Network Assistant to configure your Ethernet
Disk.
9.
Using a Web browser access the Ethernet Disk and apply any
LaCie Ethernet Disk software updates needed to restore the
Ethernet Disk software up to the latest version.
10.
Finally, restore your data from backup.
the system will display
(Fig. 76).
Restoring Your LaCie Ethernet Disk
the
Fig. 75
Fig. 76
page 57