S.m.a.r.t. Test - D-Link ShareCenter DNS-320L User Manual

Section 4 - Configuration
S.M.A.R.T stands for " Self-Monitoring, Analysis, and Reporting Technology". This is a system on a hard drive used to monitor and report on the health
of the drive. If the HD is grayed out, then it does not support S.M.A.R.T.
To run the S.M.A.R.T test, select the hard drive you wish to perform
the S.M.A.R.T test on. Select whether to run a Quick or Extended
S.M.A.R.T test. Then click Start to run the test. Click the Create
Schedule button to run the test at a pre-determined time and
date.
The Quick Test usually takes less than 10 minutes. This test will
check the electrical, mechanical, and read performance of the
hard drive. The results are displayed as Passed/Failed on the web
UI and can also be sent as an e-mail alert.
The Extended Test requires a lot more time to complete. However,
it is a more thorough when compared to the Quick Test
A warning message will prompt you to stop all services and
network activity.
Click Yes to continue the Quick S.M.A.R.T. test.
The test will run and a percentage completed will display under
the Progress Tab.
The Start button will change to a Stop button.
D-Link ShareCenter DNS-320L User Manual

S.M.A.R.T. Test

75