LaCie 2big Network 2
User Manual
2. Connecting to a Network
The 2big Network 2 can be connected directly to a computer via
USB or to your network via Ethernet. This chapter explains how to
connect your hard drive to your network. For details on connecting
to a computer, refer to chapter
Follow these steps to getting your LaCie 2big Network 2 connected
to your network:
2.1. STEP 1: Connect the Power Supply
2.2. STEP 2: Connect the Ethernet Cable
2.3. STEP 3: Connect using LaCie Network Assistant
2.4. STEP 4: Completing the Setup Wizard
• DESIGN BY NEIL POULTON
3.4. Accessing Shares via
USB.
Connecting to a Network
page 12