D-Link DNS-1100-04 Product Manual page 24

Section 4 - Getting Started
Step 5:
Enter.the.settings.for.your.LAN.2.connection.
Select.DHCP Client.if.your.network.environment.uses.DHCP.
Otherwise,.select.Static IP.and.enter.the.IP Address,.Subnet Mask,.Jumbo Frame,.
and.Gateway.details.provided.by.your.system.administrator..Leave.Jumbo Frame.
as.Disabled.if.your.network.does.not.support.it.
Set.up.the.VLAN.settings.according.to.your.virtual.LAN..
Click.Next.to.continue.
Note:.If.you.are.not.configuring.the.ShareCenter®.Pro.to.use.the.LAN.2.port,.just.
select.DHCP Client and.click.Next to.continue.
Step 6: Enter.the.Host Name,.Primary DNS,.Secondary DNS,.and.Default Gateway.LAN.
connection.you.wish.to.use.
Click.Next.to.continue.
D-Link ShareCenter Pro 1100 User Manual
Using the Setup Wizard (cont.)
21