Sending Data; Receiving Data - AT&T Z431 User Manual

When you pair your phone with another device, you will be given the option to set
incoming security. There are two options for incoming security: Always Ask and
Always Connect.
Always Ask: Require the other Bluetooth device that is connecting to your phone
to request connections in the future.
Always Connect: Authorize the other Bluetooth device to connect to the phone
without requesting in the future.
Note: Some devices don't support automatic Bluetooth connections. You will
always need to connect manually with these devices.

Sending Data

Before sending data, please confirm that:
• Bluetooth function is enabled.
• The device is visible and paired with the other device.
Open the file you wish to send. Press the Left Soft Key for Options > Send >
Via Bluetooth.
Select the destination device from the list, and press the OK Key to send
the file.
28

Receiving Data

Enable Bluetooth function and pair the phone with the device from which you
wish to receive the file.
When the paired device tries to send a file to your phone, a popup dialogue
will appear in your screen. Press the Left Soft Key for Yes to authorize the
connection.
You will see another popup asking you to accept or reject the specific file
that the other device is sending. Press the Left Soft Key for Yes to accept the
incoming file, or press the Right Soft Key for No to reject the incoming file.
Bluetooth Bluetooth 29