Set Up Your Blackberry; Insert The Battery; Charge The Battery - Blackberry 8820 Getting Started Manual

Steps?
3
Note:
If the battery
is charged, the
BlackBerry ® 8820
turns on. If the device
does not turn on,

charge the battery.

Charging the battery
can take an hour
or longer.
Steps?
4
Note:
If you have an
available USB port on
your computer and
you have installed
the BlackBerry ®
Desktop Software,
you can use the USB
cable that came
with your device to
connect it to your
computer for
charging. For more
information, see the
"Sync your BlackBerry
8820 with your
Computer" topic.
6

Set up Your BlackBerry 8820

Insert the Battery

1. Press the silver square on the back of
the BlackBerry ® 8820 and slide off the
battery cover.
2. Insert the battery so that the metal
contacts on the battery align with the
metal contacts on your BlackBerry 8820.
3. Slide the battery cover back onto the
BlackBerry 8820 so that the cover lies
flat and clicks into place.
Charge the Battery
1. Pull the plug blades down.
2. Connect the small USB end of the travel
charger cable to the USB port on the side
of your BlackBerry 8820.
3. Plug the travel charger into a power outlet.
4. Charge the battery to full power.
CAUTION: Use only accessories that Research In Motion has
approved for use with your BlackBerry 8820 . Use of other
accessories might invalidate any approval or warranty/might result in
non-operation of the BlackBerry 8820 and might be dangerous.
Insert & Charge the Battery
®
BlackBerry 8820