options while on calls
volume control
While on a call, press
the listening volume.
note: The handset volume setting (-5) and speakerphone volume setting (-6) are independent.
Changing one does not affect the other.
Join a call in progress
If a handset is already on a call and you would like to join the call, press
PhonE/
fLash
To exit the call, press
charger. The call does not end until all handsets hang up.
Chain dialing
While on a call, you can initiate a dialing sequence from numbers stored in the directory,
caller ID history or redial list. Doing this can be useful if you wish to access other
numbers (such as bank account numbers or access codes).
To dial a number from the directory, caller ID history or redial list while on a call, access
the number through the menu system:
.
While on a call, to show the directory or call history, press mEnu/
to >DIrECTory or >CaLL Log. Press
-or-
While on a call, press rEDIaL/
2.
Scroll to the desired number or use the dialing keys to find the desired directory
entry (see search by name in the online user's manual for more options).
/sELECT. The selected number is dialed.
3.
Press
mEnu
redial
Each handset stores the 0 most recently called numbers in the redial list.
To review and call numbers in the redial list, press rEDIaL/
.
most recently called number appears on the screen.
2.
If it is not the desired number, press
through the numbers in the list.
3.
Once the desired number appears, press
the number. Or press
/voLumE to increase or press
DIr
or
/sPEaKEr on another system handset.
off/
CanCEL
PausE
/CanCEL to exit the redial list.
off
or place the handset in the telephone base or
/sELECT.
mEnu
to show the redial list.
,
or rEDIaL/
DIr
CID
PhonE/
/voLumE to decrease
CID
sELECT
in idle mode. The
PausE
repeatedly to scroll
PausE
or
/sPEaKEr to dial
fLash
, and scroll