Telephone operation
Handset operation
Speakerphone
During a call, press
speakerphone and normal handset use. Press
to hang up.
NOTES:
1.
If you use the speakerphone during LOW BATTERY mode, the handset is not lit except for the
SPEAKER button.
2.
The speakerphone uses more power than the normal handset. If the handset battery becomes
very low while you are using the speakerphone, the call remains in speakerphone mode until
you hang up or the battery becomes depleted. When the battery is very low, you cannot
switch a call from normal handset use to speakerphone mode.
3.
After installing the battery into the handset, the screen may show LOW BATTERY. If you use
speakerphone at this time, the battery may become depleted. Follow the instructions in the
Battery installation & charging section on pages 7-8.
Last number redial
To view the five most recently dialed numbers:
•
To display the most recently called number (up to 30 digits),
press REDIAL/
•
To view up to five recently called numbers, press
REDIAL/
PAUSE
repeatedly.
The handset beeps twice at the beginning and at the end of the list.
Press
OFF/CLEAR to exit.
To redial a number:
•
To dial the displayed number, press
-OR-
•
You can call the most recently called number by pressing
PHONE/
While reviewing the redial memory, press
number.
SPEAKER to switch between hands-free
.
PAUSE
then qCID or DIRp, or press REDIAL/
SPEAKER, then pressing REDIAL/
or
FLASH
OFF/CLEAR
PHONE/
FLASH
/DELETE to delete the displayed
MUTE
17
SPEAKER 0:00:30
REDIAL
888-883-2445
PAUSE
or
SPEAKER.
.
PAUSE