Amplicom PowerTel 58 User Manual

Corded phone base
Hide thumbs Also See for PowerTel 58:

Advertisement

Available languages

Available languages

Quick Links

PowerTel
58
User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PowerTel 58 and is the answer not in the manual?

Questions and answers

Summary of Contents for Amplicom PowerTel 58

  • Page 1 PowerTel User Guide...
  • Page 2: Table Of Contents

    7. If you experience trouble with the telephone, please contact the Amplicom Service Center at 1-866-AMPLICOM (267-5426) for repair/warranty information. The telephone company may ask you to disconnect this equipment from the network until the problem have been corrected or you are sure that the equipment is not malfunctioning.
  • Page 3 HONE UIDE PowerTel 58 corded phone base Menu/OK Quick dial memories/ Play/Pause User profi les Stop/Esc Phonebook Answer on/ Fast forward/ Memo Mute/Delete Up/Redial/ Boost Pause (under Incoming handset) call light/ Volume up messages Volume received down Down/Calls Keypad list/Recall Handsfree Rewind/ Headset...
  • Page 4: Important Safety Instructions

    AFETY Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fi re, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
  • Page 5 T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. Important: The phone will produce high volume when Boost is switched on. 1-866-AMPLICOM (267-5426)
  • Page 6: Set Up

    ETTING STARTED Getting Started — Included Equipment • 1 Corded Phone Base, Handset and Answering Machine • 1 Power Adapter • 1 Telephone Cable Set up Connect phone base 1. Plug the power adapter into the back of the corded phone base and the other end into a wall socket.
  • Page 7 Phone book mode Ringer off Handsfree mode Call in progress Boost receiver volume is on (Icon will fl ash) Handset microphone is muted You have new calls New calls in the calls list Old calls in the calls list 1-866-AMPLICOM (267-5426)
  • Page 8 ETTING STARTED Phone Menu and Display Guide The phone menu display allows access to the phone’s functionality. Open main menu: Press Browse sub menu: Open the main menu and then press Select sub menu item: Scroll using until the menu item desired is highlighted and press Browse a function: Open the sub menu and press Select a function: Scroll using...
  • Page 9: Calling Functions

    3. To dial the number lift the handset or press to dial in handsfree mode. Note: Each phone number will be announced from the redial list provided the Read Number feature is enabled. See page 13 for details. 1-866-AMPLICOM (267-5426)
  • Page 10 ALLING UNCTIONS Call back a previous caller The phone stores the last 30 incoming phone numbers. 1. Open the incoming calls list by pressing 2. Scroll to fi nd the desired number using , and pick up the handset. Dial a number in the phone book 1.
  • Page 11 . The display will show Unmute. Switch ringer on and off 1. Press , scroll to highlight ringer tone with , and press 2. Scroll using to highlight volume, then press 3. Scroll using to highlight ring off, then press 1-866-AMPLICOM (267-5426)
  • Page 12: Menu Options

    PTIONS Menu Options User Profi les The phone can store 3 different user profi les with different settings for the Volume, Boost and Equalizer features. Each Profi le can be given a personalized name. Change a profi le name 1. Open the menu by pressing , then scroll using highlight Profi le.
  • Page 13 Changes the case setting on the display. Changing Settings: 1. Open menu by pressing , then scroll using to highlight change case and press 2. The current setting will be displayed. 3. Change the setting using and press 1-866-AMPLICOM (267-5426)
  • Page 14 PTIONS Change date/time 1. Open menu by pressing , then scroll using to highlight the desired menu setting (see above) and press 2. Scroll using to highlight Date & Time and press 3. Enter the month, day, and year and press 4.
  • Page 15 Note: Doing this will delete the phone book, calls and redial lists and any answering machine messages. 1. Open the menu by pressing , then scroll using highlight Reset. Press again. 2. The display will show PIN:____(Dfault0000). Press to confi rm or cancel. 1-866-AMPLICOM (267-5426)
  • Page 16: Phone B Ook

    HONE Phone book Up to 200 names with phone numbers can be alphabetically stored in the phone book. To quickly fi nd a phone book entry, simply enter the fi rst letter of a stored name. Note: Each phone book entry allows for up to 16 letters for any name and up to 24 digits for any phone number.
  • Page 17 5. Edit the phone number using to move the cursor, enter the new digits, and press 6. Scroll using to choose a ringer melody for this name and number 1-866-AMPLICOM (267-5426)
  • Page 18 HONE and press . The display will show Saved. Delete a phone book entry 1. Press 2. Scroll using to fi nd the entry to delete. 3. Open options by pressing , then scroll using to highlight Delete, and press 4.
  • Page 19 . The display shows Saved. Edit a quick dial entry 1. Choose the quick dial entry to edit by pressing either 2. Press . Edit is displayed, press again. 3. Use to move the cursor, enter the new letters. Press 1-866-AMPLICOM (267-5426)
  • Page 20 HONE 4. Use to move the cursor, enter the new digits, and press 5. Scroll using to choose a ringer melody for this name and number and press . The display will show Saved. Delete a quick dial entry 1. Choose the quick dial entry to delete by pressing either 2.
  • Page 21 WITHHELD NUMBER – withheld number, or ID information isn’t available • INTERNATIONAL – call is from another country or using an internet service • PAYPHONE – caller is calling from a public payphone Store numbers from a calls list to the phonebook or quick 1-866-AMPLICOM (267-5426)
  • Page 22 ALLER dial memory (M1, M2, M3) To store incoming call numbers to your phone book or quick dial list: 1. Press to open the calls list at the most recent entry. 2. Scroll using to fi nd the entry to store. , then scroll using to highlight 3.
  • Page 23 1. Press to open a calls list at the most recent entry. 2. Press , and then scroll using to highlight Delete All. Press 3. The display will show Delete All? Press to confi rm or to cancel. 1-866-AMPLICOM (267-5426)
  • Page 24: Using The Answering Machine

    NSWERING ACHINE Using the answering machine After setting up the phone system, use the following steps to set up and use the answering machine. Switch answering machine on or off Press to turn the answering machine off and on. The current answer mode will be announced. When new messages are received, the message counter on the base and the base indicator light fl ash.
  • Page 25 Record the new message after the beep. 2. To stop recording, press . To listen to the recorded message, press Note: to return to the default message, press and hold while the outgo- ing message is playing. 1-866-AMPLICOM (267-5426)
  • Page 26 NSWERING ACHINE Set the answer delay Choose the number of times the phone will ring before the answering machine answers an incoming call. Or, choose Time Saver, if no one will be available to answer the phone. Time Saver is useful if someone will be calling in from a different phone to listen to messages: if the machine answers after 2 rings, there are new messages to listen to.
  • Page 27 2. To delete it, press and hold during playback. Delete all messages and memos 1. Press twice. 2. Scroll using to highlight Del. All Msgs. Press 3. The display will show Delete All? 4. To confi rm, press . Or to cancel, press 1-866-AMPLICOM (267-5426)
  • Page 28 NSWERING ACHINE Memory full When the memory is full, the answering machine announces that fact, automatically stops taking more messages, and switches to Answer Only mode. Some existing messages or memos must be deleted before any new messages can be recorded. Access the answering machine from a remote location Messages on the answering machine can be listened to from other phones, including mobile phones.
  • Page 29 3. Refer to the next section, “Manage messages from another phone” for additional instructions. Note: if the wrong PIN is entered three times, the answering machine will hang up, and it will be necessary to call again and enter the correct PIN. 1-866-AMPLICOM (267-5426)
  • Page 30 NSWERING ACHINE Manage messages using another phone Use these numbers to manage messages from a remote location. Press… 1 to Rewind 2 to Play or Pause your messages 3 to Fast Forward through your messages 4 to Hear the outgoing message 5 to Record outgoing message (6 to stop recording) 6 to Stop messages 7 to Delete current message...
  • Page 31 Insert a pause before the dial tone if the system requires an outside line which takes awhile to connect. To insert a dialing pause using your corded phone, enter the number to reach the outside line and then press . A P on your display will show dialing pause is active. 1-866-AMPLICOM (267-5426)
  • Page 32 SE ON A PRIVATE BRANCH EXCHANGE Note: A dialing pause can be used with a phone number in the phone book. Set the dial mode There is a choice of two dialing modes: tone and pulse. The default setting is TONE and this is the correct setting for use within the United States.
  • Page 33: Help And Support

    2. Answering memory may be full. See page 28. Caller’s identifi cation (Call Line ID) isn’t working 1. Check that you have this service on your phone line. Please call your network provider. 2. The caller may have withheld their phone number. 1-866-AMPLICOM (267-5426)
  • Page 34 ELP AND SUPPORT My base doesn’t ring Check that the ringer is on. There is interference in the earpiece and/or internet connection is very slow when using the phone You must plug the phone into the wall socket via an ADSL fi lter if you have broadband internet on your phone line.
  • Page 35: Technical Details

    Technical details Power supply (base station) Input: 100-240V~50/60Hz 250mA Output: 12VDC 670mA Dialing mode Tone (DTMF) Pulse Optimum ambient temperature 32˚F to 113˚F (0˚C to 45˚C) Optimum relative humidity 20% to 80% Recall 300, 600 ms 1-866-AMPLICOM (267-5426)
  • Page 36: Default Settings

    ENERAL INFORMATION Default settings Language English Answer mode Answer and Record PIN code for remote access Answer delay Time format 24 Hour External memory Ringing volume Key tone Contrast Boost memory Shaker Recall time 600ms Dialing mode Tone Service Center...
  • Page 37: Maintenance And Warranty

    • Never use cleaning agents or solvents. Warranty AMPLICOM equipment is produced and tested according to the latest production methods. The implementation of carefully chosen materials and highly developed technologies ensure trouble free functioning and a long service life. The terms of the warranty do not apply where the cause of the equipment malfunction is the fault of the telephone network operator or any interposed private branch extension system.
  • Page 38: Declaration Of Conformity

    If your equipment shows signs of defect during the period of warranty, please return to the sales outlet in which you purchased the AMPLICOM equipment together with the purchase receipt. All rights to claims under the terms of warranty in accordance with this agreement must be asserted exclusively with regard to your sales outlet.
  • Page 39 Check the contents of the box 6 Language 13 Date/time 14 Default settings 36 Making a call 9 Dial mode 32 Memory full 28 Dialing pause 31 Mute 11 Dialing from the phone book 16 Display icons 7 1-866-AMPLICOM (267-5426)
  • Page 40 NDEX Phone book 16-20 Profi les 12-14 Quick dial 10 Record outgoing message 25 Redial 9 Remotely checking messages 29 Tone control (see Equalizer) Using a headset 11 Using the menu 12 Volume 10-13 Service Center...
  • Page 41 THIS PAGE LEFT INTENTIONALLY BLANK...
  • Page 42 PowerTel Guía del usuario...
  • Page 43 En el caso de operaciones en las que se debe llevar puesto el equipo, este teléfono ha sido probado y cumple con las pautas de exposición a RF de la FCC cuando el equipo se utiliza con los accesorios Amplicom proporcionados o designados para este producto. El uso de otros accesorios no garantiza el cumplimiento de las pautas de exposición a RF de la FCC.
  • Page 44 UÍA DEL TELÉFONO PowerTel 58 teléfono con cable Menú/ Memorias Aceptar de marcado rápido/ Reproducir/ Perfi les de Pausar usuario Detener/Salir Directorio Respuesta de Adelantar/ encendido / Recordatorio apagado Arriba/Volver Silenciar/ a marcar/ Borrar Pausar Amplifi cador Luz de (bajo el llamada teléfono) entrante/...
  • Page 45 EGURIDAD Instrucciones importantes de seguridad Al usar el equipo telefónico, siempre debe tomar precauciones de seguridad para reducir el riesgo de incendios, electrocución y lesiones, como las que se mencionan a continuación: 1. No utilice este producto cerca de lugares con agua, como cerca de una bañera, lavamanos, lavaplatos o pileta de lavadero, sobre una superfi cie mojada o cerca de una piscina.
  • Page 46 El logotipo de conformidad con TIA-1083 es una marca comercial de Telecommunications Industry Association. Usado bajo licencia. Precaución: El teléfono tendrá un volumen alto cuando esté encendido el amplifi cador. 1-866-AMPLICOM (267-5426)
  • Page 47 NTRODUCCIÓN Introducción: Elementos incluidos • 1 base de teléfono con cable con auricular y contestador automático • 1 transformador • 1 cable telefónico Instalación 1. Conecte el teléfono con cable i. Enchufe el transformador en la parte posterior del teléfono con cable y el otro extremo al tomacorrientes.
  • Page 48 Timbre desactivado Llamada interna en curso Modo manos libres Nuevas llamadas en la lista de Llamada en curso llamadas Volumen amplifi cado del Llamadas anteriores en la lista auricular activo (el icono parpadea) de llamadas Micrófono del teléfono silenciado 1-866-AMPLICOM (267-5426)
  • Page 49 NTRODUCCIÓN Guía en pantalla y menú del teléfono La pantalla de menú del teléfono permite el acceso a las funciones de cada teléfono. Abrir el menú principal: Pulse Examinar un submenú: Abra el menú principal y luego pulse Seleccionar un elemento del submenú: Desplácese con los botones hasta que el elemento deseado del menú...
  • Page 50: Funciones De Llamada

    2. Desplácese por la lista de remarcado con los botones hasta que el número que desee volver a marcar quede resaltado. 3. Para marcar el número, levante el auricular o pulse para marcar en el modo manos libres. 1-866-AMPLICOM (267-5426)
  • Page 51 UNCIONES DE LLAMADA Nota: Cada número telefónico será anunciado desde la lista de remarcado si la función Leer número está activada. Consulte la página 13 para obtener más información. Devolver una llamada El teléfono guarda los últimos 30 números telefónicos de las llamadas entrantes. 1.
  • Page 52 Conecte los auriculares en la entrada situada en la parte posterior del . Para mantenimiento o cambio, puede comprar un teléfono y pulse teléfono con el n.° de modelo NL100 a través del centro de mantenimiento o su vendedor. 1-866-AMPLICOM (267-5426)
  • Page 53 UNCIONES DE LLAMADA Silenciar el teléfono Cuando se realiza esta acción durante una llamada, se silencia el micrófono del teléfono para que no transmita ningún sonido a la persona del otro lado de la línea. Para desactivar el micrófono, pulse .
  • Page 54: Opciones Del Men

    Modifi car el volumen, la amplifi cación o la ecualización de un perfi l 1. Pulse , desplácese con para resaltar Profi le (Perfi l) y vuelva a pulsar 2. Desplácese con para resaltar Profi le 1, 2 o 3. Luego pulse 1-866-AMPLICOM (267-5426)
  • Page 55 PCIONES DEL MENÚ 3. Desplácese con hasta que la confi guración deseada (volumen, amplifi cación o ecualización) quede resaltada. Pulse 4. Se mostrará la confi guración actual. 5. Utilice para cambiar la confi guración. Pulse Cambio de la confi guración del menú Melodía del timbre del teléfono: Hay nueve melodías de timbre.
  • Page 56 (ver arriba) y pulse 2. Desplácese con para resaltar Date & Time (Fecha y hora) y pulse 3. Ingrese el día, mes y año, y pulse 4. Ingrese la hora (el teléfono tiene un reloj de 24 horas) y pulse 1-866-AMPLICOM (267-5426)
  • Page 57 PCIONES DEL MENÚ Cambie el reloj al formato de 12 o al de 24 horas 1. Abra el menú pulsando y luego desplácese con para resaltar Time (Hora). Vuelva a pulsar 2. Desplácese con hasta resaltar Format (Formato) y pulse 3.
  • Page 58 Pulse para usar caracteres especiales • Pulse para mayúsculas y minúsculas Nota: Para escribir la misma letra dos veces, escriba la letra y luego aguarde a que el cursor se mueva al espacio siguiente para volver a escribirla. 1-866-AMPLICOM (267-5426)
  • Page 59 IRECTORIO Escribir un nombre y un número en el directorio 1. Pulse y mantenga presionado durante 2 segundos hasta que la pantalla muestre Enter Name (Ingresar nombre) y un cursor parpadeante. 2. Utilice el teclado numérico para escribir el nombre que desee guardar. Luego pulse 3.
  • Page 60 Borrar todas las entradas del directorio 1. Pulse 2. Abra las opciones pulsando y luego desplácese con para resaltar Delete All (Borrar todo), y pulse 3. La pantalla indicará Delete All? (¿Borrar todo?). Pulse para confi rmar la para cancelar. eliminación o 1-866-AMPLICOM (267-5426)
  • Page 61 IRECTORIO Uso de la memoria de marcado rápido El teléfono puede guardar un nombre (16 caracteres como máx.) y un número telefónico (24 dígitos como máx.) en cada uno de los botones de memoria de marcado rápido: Guardar un nombre y un número de marcado rápido 1.
  • Page 62 Delete (Borrar) y pulse 3. La pantalla indicará Delete? (¿Borrar?). Pulse para confi rmar o para cancelar. Cambiar a mayúscula o minúscula 1. Presione el botón para cambiar a mayúscula o minúscula el nombre de entrada de la agenda. 1-866-AMPLICOM (267-5426)
  • Page 63 ISTA DE LLAMADAS Llamadas entrantes Nota: Debe suscribirse al servicio de visualización de llamadas/identifi cación de llamadas de su proveedor de servicios telefónicos para tener esta función. Los números de teléfono de las llamadas entrantes aparecerán en la lista de llamadas.
  • Page 64 2. Pulse y luego desplácese con para resaltar Delete All (Borrar todo). Pulse . La pantalla indicará Delete All? (¿Borrar todo?). Pulse para confi rmar o para cancelar. 1-866-AMPLICOM (267-5426)
  • Page 65 ONTESTADOR AUTOMÁTICO Uso del contestador automático Después de confi gurar el sistema telefónico, siga estos pasos para confi gurar y usar el contestador automático. Encender o apagar el contestador automático Pulse para encender y apagar el contestador automático. Se indicará el modo de respuesta actual. Al recibir mensajes nuevos, el contador de mensajes y la luz indicadora de la base parpadean.
  • Page 66 Grabe el mensaje nuevo después del pitido. 2. Para detener la grabación, pulse . Para escuchar el mensaje grabado, pulse Nota: para volver al mensaje predeterminado, pulse y manténgalo presionado mientras se reproduce el mensaje saliente. 1-866-AMPLICOM (267-5426)
  • Page 67 ONTESTADOR AUTOMÁTICO Confi gurar la demora de respuesta Elija la cantidad de veces que debe sonar el teléfono antes de que el contestador automático responda una llamada entrante. O bien, elija la función Time Saver (Ahorro de tiempo), en caso de que no haya nadie que pueda atender el teléfono.
  • Page 68 Para reproducir o pausar, pulse • Para detener, pulse • Para retroceder, pulse • Para adelantar, pulse Borrar un solo mensaje o recordatorio 1. Pulse para reproducir un mensaje o recordatorio. 2. Para borrarlo, pulse y manténgalo presionado durante la reproducción. 1-866-AMPLICOM (267-5426)
  • Page 69 ONTESTADOR AUTOMÁTICO Borrar todos los mensajes y recordatorios 1. Pulse dos veces. 2. Desplácese con para resaltar Del. All Msgs (Borrar todos los mensajes). Pulse 3. La pantalla indicará Delete All? (¿Borrar todo?). 4. Para confi rmar, pulse . Para cancelar, pulse Memoria llena Cuando la memoria está...
  • Page 70 3. Consulte la siguiente sección, “Administrar mensajes desde otro teléfono” para obtener instrucciones adicionales. Nota: si se ingresa tres veces un PIN incorrecto, el contestador automático colgará, y deberá llamar nuevamente e ingresar el PIN correcto. 1-866-AMPLICOM (267-5426)
  • Page 71 ONTESTADOR AUTOMÁTICO Administrar mensajes desde otro teléfono Utilice estos números para administrar los mensajes desde una ubicación remota. Pulse... 1 para Retroceder 2 para Reproducir o Pausar los mensajes 3 para Adelantar los mensajes 4 para Escuchar el mensaje saliente 5 para Grabar el mensaje saliente (6 para detener la grabación) 6 para Detener los mensajes 7 para Borrar el mensaje actual...
  • Page 72 Recall (Volver a llamar) y luego pulse 3. Aparecerá la confi guración actual del tiempo de rellamada, por ej.: Short (Breve). 4. Elija la confi guración de tiempo de rellamada que desee (Short [Breve] o Long [Prolongado]) con y pulse 1-866-AMPLICOM (267-5426)
  • Page 73 SO EN UN CONMUTADOR PRIVADO Insertar una pausa de marcación Inserte una pausa antes del tono de marcado si el sistema requiere una línea externa que demora un rato en conectarse. Para insertar la pausa de marcación con el teléfono con cable, escriba el número para conectarse con la línea externa y luego pulse .
  • Page 74 El identifi cador de llamadas (identifi cador de línea llamante) no funciona 1. Compruebe que cuente con este servicio en su línea telefónica. Llame al proveedor de su red. 2. La persona que llama podría estar ocultando su número telefónico. 1-866-AMPLICOM (267-5426)
  • Page 75 YUDA Y ASISTENCIA TÉCNICA Mi teléfono o base no suena Compruebe que el timbre esté activado. Hay interferencia en al auricular o la conexión a Internet es muy lenta cuando uso el teléfono Si tiene Internet de banda ancha en su línea telefónica, conecte el teléfono al enchufe mural con el fi ltro de ADSL.
  • Page 76: Especifi Caciones

    Fuente de alimentación (base) Entrada: 100-240V~50/60Hz 250mA Salida: 12VCC 670mA Modo de marcación Tono (DTMF) Pulso Temperatura ambiente óptima 32 ˚F a 113 ˚F (0 ˚C a 45 ˚C) Humedad relativa óptima 20% a 80% Rellamada 300, 600 ms 1-866-AMPLICOM (267-5426)
  • Page 77 NFORMACIÓN GENERAL Confi guración predeterminada del teléfono con cable Idioma Inglés Modo de respuesta Responder y grabar Código PIN para acceso remoto Demora de respuesta Memoria externa Memoria interna Volumen de timbre Tono del teclado Activado Contraste Memoria de amplifi cación Desactivada Vibrador Activado...
  • Page 78 • Nunca use agentes limpiadores ni disolventes. Garantía El equipo AMPLICOM ha sido producido y probado de acuerdo con los métodos de producción más recientes. La implementación de materiales cuidadosamente seleccionados y de tecnologías altamente desarrolladas garantiza el funcionamiento sin inconvenientes y una gran durabilidad. Los términos de la garantía no tienen validez si la causa del desperfecto del equipo...
  • Page 79 El derecho a compensación en caso de daños queda excluido si no hay pruebas de intención o negligencia grave por parte del fabricante. Si su equipo AMPLICOM muestra indicios de defectos durante el período de la garantía, devuélvalo al punto de venta donde lo haya comprado junto con el recibo de compra.
  • Page 80 Control del tono (ver Ecualizador) Memoria llena 28 Directorio 16-20 Realizar una llamada 9 Registro de salida de mensajes 25 Revisar mensajes en forma remota 29 Elementos incluidos 6 Ecualizador 12 Silenciar 11 Fecha/hora 14 Finalizar una llamada 9 Usar auriculares 32 1-866-AMPLICOM (267-5426)
  • Page 81 NDEX Usar el menú 12 Uso de auriculares 11 Volumen 10-13 Volumen de timbre de la base 13 Volumen del timbre del teléfono 10 Volver a marcar 9 Centro de Atención al Cliente...
  • Page 82 Questions? ¿Dudas? Amplicom USA Service Center 310 Ambrose Avenue Nashville, TN 37207 V/TTY: 1-866-AMPLICOM (267-5426) www.amplicomusa.com Distributed by: Amplicom USA LLC Made In China Distribuido por: Amplicom USA LLC Hecho en China...

Table of Contents