CONTROLS
Driver side
On the driver's door panel are set the
buttons fig. 70 for controlling, with
electronic key fitted into the ignition de-
vice:
A: left window opening/closing; win-
dow opening or closing in "automatic
continuous" mode;
B: right window opening/closing; win-
dow opening or closing in "automatic
continuous" mode;
IMPORTANT Window automatism
shall be restored after replacing or dis-
connecting the battery or after replacing
the power window control unit protec-
tion fuses.
fig. 70
Restoring procedure shall be performed
with doors closed as follows:
1. open the driver's window complete-
ly and then keep the button
pressed for at least 3 seconds af-
ter opening the window;
2. close the driver's window complete-
ly and then keep the button
pressed for at least 3 seconds af-
ter closing the window;
3. repeat operations described at points
1 and 2 on the passenger's window;
4. operate the windows to check for
proper intialisation.
Press buttons A or B to open/close the
required window.
Pressing briefly one of the buttons the
window "jerks" whereas a prolonged
pressing makes the window opening or
closing in "automatic continuous" mode.
Pressing button A or B again will stop the
window in the required position.
A0F0051m
89
Need help?
Do you have a question about the Brera and is the answer not in the manual?