TO RESET THE MEMORISED
SPEED
If the device has been disengaged for
example pressing the brake or clutch
pedal, the memorised speed can be re-
set as follows:
❒ accelerate gradually until reaching a
speed approaching the one memo-
rised;
❒ engage the gear selected at the time
of speed memorising (4th or high-
er gear);
❒ press button RES (set at stalk end).
TO INCREASE THE
MEMORISED SPEED
The speed memorised can be increased
in two ways:
❒ pressing the accelerator and then
memorising the new speed reached;
or
❒ moving the stalk upwards (+).
Each operation of the stalk will corre-
spond to a slight increase in speed
(about 1.5 km/h), while keeping the
stalk upwards will correspond to a con-
tinuous speed increase.
TO REDUCE MEMORISED
SPEED
The speed memorised can be increased
in two ways:
❒ disengaging the device and then
memorising the new speed;
or
❒ moving the stalk downwards (–) un-
til reaching the new speed which will
be memorised automatically.
Each operation of the stalk will corre-
spond to a slight decrease in speed
(about 1.5 km/h), while keeping the
stalk downwards will correspond to a
continuous speed decrease.
73
Need help?
Do you have a question about the Brera and is the answer not in the manual?