IF AN EXTERIOR
LIGHT BURNS OUT
For the type of bulb and power rating,
see "When needing to change a bulb".
FRONT LIGHT UNITS
The front light units contain main beam,
sidelights, direction indicator and dipped
beam bulbs.
To change the bulbs, turn cap counter-
clockwise and then remove it.
The bulbs are arranged inside the light
unit fig. 22 as follows:
A Main beam headlights
B Sidelights/direction indicators
C Dipped beam headlights
fig. 22
WARNING
After replacement, re-
fit the covers correctly
checking that they are proper-
ly secured.
Main beam headlights
(halogen bulbs)
To change the bulb, proceed as follows:
❒ remove cover A-fig. 22 by turning
it counter-clockwise;
❒ disconnect the electric connector A-
fig. 23;
❒ release the bulb holder catch B;
A0F0191m
fig. 23
❒ remove the bulb and replace it;
❒ fit the new bulb and refit bulb hold-
er catch B;
❒ reconnect the electrical connector A;
❒ refit the protective cover properly.
A0F0223m
185
Need help?
Do you have a question about the Brera and is the answer not in the manual?