Table of Contents
Advertisement
III. INSTALLATION
3. Real Time Clock (RTC) RAM / Battery Test Jumper (RTCLR)
The CMOS RAM is powered by the onboard button cell battery. You can test
the battery's current by removing this jumper and attaching a current meter to
each pin. WARNING: You must unplug the power cord to your power
supply to ensure that there is no power to your motherboard. The CMOS
RAM containing BIOS setup information will be cleared by this action.
You must enter BIOS to "Load Setup Defaults" and re-enter any user infor-
mation after removing and reapplying this jumper.
RTC RAM
RTCLR
Operation
[short] (Default)
Clear Data
[open]
Clear CMOS Data / Battery Test Jumper
ASUS P/I-XP55TVP4 User's Manual
RTCLR
RTCLR
Operation
Clear CMOS Data /
(Default)
Battery Test Mode
9
Advertisement
Table of Contents
