Page 1
INSTRUCTION MANUAL APTUC-2110PR Customer Help Line 01422 203676...
Page 2
WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : SHOCK HAZARD-DO NOT OPEN LIGHTNING FLASH WITH ARROWHEAD SYMBOL - EXCLAMATION POINT - within an equilateral triangle, within an equilateral triangle, is intended to alert the is used to indicate that a specific component shall be user to the presence of uninsulated dangerous...
Page 3
SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. 3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 4.
LOCATION OF CONTROL 19.) SPEAKER JACK ( L / R ) 20.) FM ANTENNA 21.) AM ANTENNA 22.) AC CORD POWER SOURCE AC POWER Connect to a 230/240V AC 50 Hz supply. Do not attempt to connect to any other source.
RADIO OPERATION AUTOMATIC TUNING 1. Press the “FUNCTION” button to select “TUNER” mode. 2. Press the “STOP / BAND” button to select AM or FM. 3. Press the “SKIP +” or “SKIP -” button to start automatic tuning process. 4. When a station is tuned in the tuning process, it will stop automatically and you can listen to your desired station.
CD / MP3 OPERATION GENERAL OPERATION PLAY / PAUSE Press to start playing CD / MP3 disc. Press again to stop playing CD / MP3 operation temporarily. Press again to resume playback. SKIP + & Press to go to the next track or back to the previous track. SKIP - Press and hold while playing until you find the point of the sound.
Page 9
CD / MP3 OPERATION PROGRAM Up to 20 tracks can be programmed for CD disc play in any ord Up to 99 tracks can be programmed for MP3 disc play in any order. Be sure to press the “STOP” button before use. 1.
Page 10
USB / SD OPERATION GENERAL OPERATION PLAY / PAUSE Press to start playing tracks from the USB / SD card. Press again to stop playing USB / SD operation temporarily. Press again to resume playback. SKIP + & Press to go to the next track or back to the previous track. SKIP - Press and hold while playing until you find the point of the sound.
OTHER FEATURES Press the “EQ” button on remote control, each press switch the EQ function as follows: 1 - CLASSIC 2 - ROCK 3 - POP 4 - JAZZ 5 - FLAT (NORMAL) Notes: - The player not responsible for playability of MP3 in any case. Due to recording condition such as PC performance, writing software, media ability or etc.
OTHER FEATURES SLEEP 1. Press the “SLEEP” button on remote control, display will show “SLEEP 90”. That means, after 90 minutes, appliance will automatically turn to standby mode. 2. Press the “SLEEP” button again to select the automatically turn off time, from 90, 80, 70, 60, 50, 40, 30, 20, 10 minutes.
Page 13
FAULT GUIDE Should you experience any problems please see guide below before calling the help line SYMPTOM POSSIBLE CAUSE REMEDY No power to appliance Check the unit is plugged into a Dead. No display. mains supply and is turned on. Power button not pushed in Press “POWER”...
Page 14
ON HANDLING DISCS ON CLEANING DISCS Do not touch the playback side of the disc. Fingerprints and dust on the disc cause sound distortion and skipping of tracks. Wipe the disc Do not attach paper or tape to disc. from the centre outwards with a soft cloth. Always keep the disc clean.
Need help?
Do you have a question about the APTUC-2110PR and is the answer not in the manual?
Questions and answers