Page 1
INSTRUCTION MANUAL APTMIC110AR Customer Help Line 01422 263313 www.ekey.co.uk...
Page 2
WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : SHOCK HAZARD-DO NOT OPEN LIGHTNING FLASH WITH ARROWHEAD SYMBOL - EXCLAMATION POINT - within an equilateral triangle, within an equilateral triangle, is intended to alert the is used to indicate that a specific component shall be user to the presence of uninsulated dangerous...
SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. 3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 4.
LOCATION OF CONTROL 1. POWER INDICATOR 2. FM STEREO INDICATOR 3. PROGRAM 4. REPEAT 5. PLAY / PAUSE 6. SKIP - 7. SKIP + 8. STOP 9. DIAL POINTER 10. BAND SELECTOR 11. FUNCTION SELECTOR 12. VOLUME CONTROL 13. TUNING CONTROL 14.
REMOTE CONTROL 1. PLAY / PAUSE 2. SKIP - 3. PROGRAM 4. STOP 5. SKIP + 6. REPEAT BATTERY INSTALLATION Insert 2 x “AAA” size batteries into the battery compartment. Be sure that the batteries are inserted correctly to avoid damage to the remote control. Always remove the batteries when the remote control will not be used for a long period of time, as this will cause leakage to the batteries and subsequently damage to your set.
RADIO OPERATION GENERAL OPERATION 1. Set the “FUNCTION” selector to “RADIO” mode. 2. Select desired band by using the “BAND” selector. 3. Adjust radio frequency to your desired station by using the “TUNING” control. 4. Adjust the “VOLUME” control to the desired level. FM / FM-STEREO RECEPTION - Set the “BAND”...
Page 7
CD OPERATION GENERAL OPERATION PLAY / PAUSE Press to start playing CD disc. Press again to stop playing CD operation temporarily. Press again to resume playback. SKIP + & Press to go to the next track or back to the previous track. SKIP - Press and hold while playing until you find the point of the sound.
CD OPERATION PROGRAM Up to 20 tracks can be programmed for disc play in any order. Be sure to press the “STOP” button before use. 1. Press the “PROGRAM” button, the display will show “01” and flash. 2. Select desired track by using the “SKIP +” or “SKIP -” button. 3.
Fault Guide. Should you experience any problems please see guide below before calling the help line Symptom Fault Action Dead. No Operations No power to player. Check the power plug is in firmly and connected to a power supply. If batteries are fitted, ensure they are new and fitted the correct way round.
Page 10
IMPORTANT If the mains plug requires replacement, please follow the following instructions. DO NOT CONNECT THE CENTRE PIN (EARTH). Connect the Blue wire to the (N) terminal ( this may be coloured blue). Connect the Brown wire to the (L) terminal adjacent to the fuse ( this may be coloured brown).
Need help?
Do you have a question about the APTMIC110AR and is the answer not in the manual?
Questions and answers