Related Manuals for Akura APTMIC 771AR
Summary of Contents for Akura APTMIC 771AR
- Page 1 INSTRUCTION MANUAL APTMIC 771AR Customer Help Line 01422 263313 Opening hours Mon-Fri 8 am – 8pm. Sat 9 am – 4pm. Sun 11am – 4pm “Bank holidays as Sun” www.ekey.co.uk (24HR)
- Page 2 WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : SHOCK HAZARD-DO NOT OPEN LIGHTNING FLASH WITH ARROWHEAD SYMBOL - EXCLAMATION POINT - within an equilateral triangle, within an equilateral triangle, is intended to alert the is used to indicate that a specific component shall be user to the presence of uninsulated dangerous...
-
Page 3: Safety Instructions
SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. 3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 4. -
Page 4: Location Of Control
LOCATION OF CONTROL 1.) VOLUME CONTROL 2 3 4 5 6 2.) SKIP - 3.) CD DOOR 4.) SKIP + 5.) REMOTE SENSOR 6.) CD DOOR OPEN / CLOSE 7.) PROGRAM 8.) REPEAT 9.) PLAY / PAUSE 10.) EXTRA BASS 11.) STOP 12.) FM STEREO INDICATOR 13.) LED DISPLAY... -
Page 5: Remote Control
REMOTE CONTROL 1.) PLAY / PAUSE 2.) SKIP - 3.) PROGRAM 4.) STOP 5.) SKIP + 6.) REPEAT BATTERY INSTALLATION Insert 2 x “AAA” size batteries into the battery compartment. Be sure that the batteries are inserted correctly to avoid damage to the remote control. Always remove the batteries when the remote control will not be used for a long period of time, as this will cause leakage to the batteries and subsequently damage to your set. -
Page 6: Radio Operation
RADIO OPERATION GENERAL OPERATION 1. Connect the Loudspeakers to the connectors at the rear of the appliance. 2. Connect the appliance to the mains supply. 3. Press the “Power” button in. The “Power” led should light. 4. Set the “FUNCTION” to “RADIO” mode. 5. -
Page 7: Tape Operation
TAPE OPERATION GENERAL OPERATION PAUSE Press to stop playing tape operation temporarily. Press again to resume tape operation. STOP / EJECT Press to stop tape operations. Press again to open the cassette door after the tape spools stop turning. FAST FORWARD &... - Page 8 CD OPERATION GENERAL OPERATION PLAY / PAUSE Press to start playing CD disc. Press again to stop playing CD operation temporarily. Press again to resume playback. SKIP + & Press to go to the next track or back to the previous track. SKIP - Press and hold while playing until you find the point of the sound.
-
Page 9: On Handling Discs
CD OPERATION PROGRAM Up to 20 tracks can be programmed for disc play in any order. Be sure to press the “STOP” button before use. 1. Press the “PROGRAM” button, the display will show “01” and flash. 2. Select desired track by using the “SKIP +” or “SKIP -” button. 3. -
Page 10: Fault Guide
FAULT GUIDE Should you experience any problems please see guide below before calling the help line Symptom Possible Cause Remedy Dead. No Operations No power to player. Check the power plug is in Firmly and connected to a power supply. Function switch in incorrect Switch to CD , Radio or put a tape in. -
Page 11: Specifications
IMPORTANT If the mains plug requires replacement, please follow the following instructions. DO NOT CONNECT THE CENTRE PIN (EARTH). Connect the Blue wire to the (N) terminal ( this may be coloured blue). Connect the Brown wire to the (L) terminal adjacent to the fuse ( this may be coloured brown).
Need help?
Do you have a question about the APTMIC 771AR and is the answer not in the manual?
Questions and answers