Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Ariston ARXL 129 W SP

  • Page 1: Table Of Contents

    Instructions for use WASHING MACHINE Contents Important safety instructions 2-3 Important safety instructions Grounding Instructions English,1 Safety Installation instructions 4-5-6 Unpacking and leveling Minimum Installation Spacing Connecting Water Inlet Drainage Connecting the drain hose Electrical Under Sink Method Technical data Description of the washing machine and starting a wash cycle 7-8 ARXL 129 W SP...
  • Page 2: Na Important Safety Instructions

    Important safety instructions GROUNDING INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS WARNING - To reduce the risk of fire, electrical shock, or This appliance must be grounded. In the event of mal- injury to persons when using your appliance, follow basic function or breakdown, grounding will reduce the risk of precautions, including the following: electric shock by providing a path of least resistence for electric current. This appliance is equipped with a cord ha- • Read all instructions before using the appliance.
  • Page 3: Safety

    Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock, DO NOT remove cover (or back)/no user servicable parts inside. Refer for servicing to qualified services personnel. The model and serial number of this product can be found inside the door and on the back of the unit. You should note the model and serial numbers of this unit in the space provided. Retain this booklet as a permanent record of your purchase to aid in identification in the event of theft. MODEL N. SERIAL N. WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
  • Page 4: Installation Instructions

    Installation instructions Levelling the machine correctly will provide it with stability, This instruction manual should be kept in a safe place help to avoid vibrations and excessive noise and prevent it for future reference. If the washer is sold, transferred or from shifting while it is operating. moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarize Minimum Installation Spacing himself/herself with its operation and features.
  • Page 5: Connecting Water Inlet

    Connecting Water Inlet Floor Standpipe Wall Standpipe If the water pipes you will be connecting to are new or unused, run the water until clear to remove any debris that could clog the water valve screens or valves before con- necting the machine. NOTE: Supply shut-off valves should be easily accessible.
  • Page 6: Electrical

    Electrical • Insert the outlet end of the drain hose into the standpipe, wall or floor drain (Fig. 6). NOTE: The outlet end of the • Machine Voltage/Amperage - 120V, 60 Hz, 4 Amp. drain hose MUST be at least 20” (50 cm) above the base • Connection - 3-prong plug with 6’ cord is provided with of the machine. No more than 6” of the drain hose should the machine. be inserted into the drain pipe to prevent siphoning. • Circuit/Protector - 3-wire single phase, 120V, 60 Hz, AC, on a separate 15 Amp circuit. • Use a strap, cable tie, or similar item to hold the hose or the U-Clamp in place. Technical Information Floor Standpipe U-Clamp 6" max. Technical data 25" (62 cm) min. 34" (86 cm) max. 20"...
  • Page 7: Description Of The Washing Machine And Starting A Wash Cycle

    Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS/ DELAY TIMER indicator lights SPIN SPEED knob DOOR ON/OFF button LOCKED TEMPERATURE indicator light knob START/PAUSE Detergent dispenser drawer button with indicator FUNCTION light buttons with WASH CYCLE indicator lights knob...
  • Page 8: Indicator Lights

    Indicator lights Wash cycle phase indicator lights Once the desired wash cycle has been selected and has be- gun, the indicator lights switch on one by one to indicate which The indicator lights provide important information. phase of the cycle is currently in progress. This is what they can tell you: Wash Delayed start If the DELAY TIMER function has been activated (see “Per- Rinse sonalization”), after the wash cycle has been started the Spin indicator light corresponding to the selected delay period will begin to flash:...
  • Page 9: Wash Cycles

    Wash cycles Table of wash cycles Detergents Max. Max. Max load Cycle Description of the wash cycle temp. speed (lb) duration Fabric (°C) (rpm) Bleach Wash softener Essentials cycles 1 Cottons Regular: Heavily soiled whites and resistant colours.   2 Cottons Colored: Lightly soiled whites and delicate colours. Warm ...
  • Page 10: Personalization

    Personalization Setting the temperature By pressing the TEMPERATURE button to set the wash temperature. (See Table of wash cycles) Wash temperature can be set selecting , “Cold”, “Warm”, “Hot” or 2 in-between positions which correspond to intermediate levels of water tempe- rature (example: the position between “cold” and “warm” is lukewarm). See below for the indication in °C and °F for each temperature position.
  • Page 11 Extra rinse By selecting this function, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly useful for sensitive skin. ! This function may not be used in conjunction with wash cycles 5, 10, B, C. Super Wash Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this function offers a high-performance wash. ! This function may not be used in conjunction with wash cycles 4, 5, 7, 10, 12, 13, A, B, C.
  • Page 12: Detergents And Laundry

    Curtains: fold curtains and place them in a pillow case or Do not use hand washing detergents because these mesh bag. Use wash cycle 12. create too much foam. Wool: Ariston is the only washer manufacturer to have been Open the detergent di- awarded the prestigious Woolmark Platinum Care endorse- spenser drawer and pour ment (M.0508) by the Woolmark Company, which means that in the detergent or washing all woollen garments may be washed in the washer, even tho- additive, as follows.
  • Page 13: Care And Maintenance Instructions

    Care and maintenance Cutting off the water and electricity Cleaning the pump supplies The washing machine is fitted with a self-cleaning pump • Turn off the water tap after every wash cycle. This will which does not require any maintenance. Sometimes, limit wear on the hydraulic system inside the washing small items (such as coins or buttons) may fall into the pre- machine and help to prevent leaks.
  • Page 14: Troubleshooting

    Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be not solved easily using the following list. Problem: Possible causes / Solutions: The washing machine does not • The appliance is not plugged into the socket fully, or is not making contact. switch on. • There is no power in the house. The wash cycle does not start. • The washing machine door is not closed properly. • The ON/OFF button has not been pressed. • The START/PAUSE button has not been pressed. • The water tap has not been opened. • A delayed start has been set (see “Personalization”). The washing machine does not • The water inlet hose is not connected to the tap.
  • Page 15: Service

    Service Before calling for Assistance: • Check whether you can solve the problem alone (see “Troubleshooting”); • Restart the programme to check whether the problem has been solved; • If this is not the case, contact an authorised Technical Assistance Centre using the telephone number provided on the guarantee certificate. Always request the assistance of authorised technicians. Have the following information at hand: • the type of problem; • the appliance model (Mod.); • the serial number (S/N). This information can be found on the data plate applied to the rear of the washing machine, and can also be found on the front of the appliance by opening the door.
  • Page 16: Warranty

    This limited one-year warranty (“Warranty”) is given only 6. Damage caused by neglect, accident, fire, floods or acts to the original end-use/retail purchaser (the “First Using of God. Purchaser”) of the accompanying Ariston product(s) (the 7. Physical Damage to the appearance of your Ariston “Ariston Product”). Product including, without limitation, scratches, rust, dents, If you purchased this Ariston Product from someone other warping, peeling and the like.
  • Page 17: Warranty

    WHAT YOU SHOULD DO TO OBTAIN WARRANTY SERVICE All repairs or warranty service must by provided by Ariston or an Authorized Ariston Service Center. To schedule warranty service please call 1-877-356-0766, 1-800-356-0766 email service@aristonamerica.com. Please remember to service@westlandsales.com provide us with your Ariston Product’s model number and serial number. Please note that a copy of your original purchase receipt showing the purchase date and the vendor’s name and ad- dress are required to obtain service under this Warranty. If...
  • Page 18 195081703.00 09/2009 - Xerox Fabriano...

Table of Contents