Toshiba BDX1200 Owner's Manual page 15

6. Press OK, enter Resolution setting. ..Press.OK,.enter.Resolution.setting..
Choose
a resolution that fits your TV.
Change will be applied immediately, you have
15s to determine whether to save the setting
or rollback to prior resolution. Better
performance will be provided by an HDMI
connection!
Previous
Press./ to.select.an.option..Press.OK.
Select "Yes" or "No" using /.
Note:
-When the player is connected to both VIDEO
OUTPUT jack and HDMI OUTPUT jack, resolution is
set to 720p/1080i/1080p, there will be no video
output through VIDEO OUTPUT jack.
Resolution
14s
has been changed!
Does everything looks all right with this
resolution? Press Yes if you want to apply it.
Press No to rollback to previous one.
Previous
7. Press OK, enter Aspect ratio setting. ..Press.OK,.enter.Aspect.ratio.setting..
Choose
an aspect ratio that fits your TV.
The change will be applied in the next page.
Determine whether to save the setting or
rollback to the previous aspect ratio.
Previous
Press./ to.select.an.option..Press.OK.
Setting
wizard is complete!
Now press the OK button to finish and return
to the Setup Menu.
Previous
8. Press OK to return to [General Setting] ..Press.OK.to.return.to.[General.Setting].
Menu.
• [Upgrade]
For.software.upgrades.to.enhance.
performance,.you.could.select.the.
following.upgrade.method.and.start.to.
upgrade.
{Disc}/{USB Storage}.
Upgrade.the.software.from.the.disc.or.USB.
Flash.device.
1..Insert.the.disc.or.connect.the.USB.Flash.
device which contains the upgrade file
package.
2..Follow.the.instruction.on.the.TV
screen to confirm upgrade operation.
Auto
480i/576i
480p/576p
720p
1080i
1080p
OK Next
Yes
No
Next
OK
16:9 Full
16:9 Normal
4:3 Pan&Scan
4:3 Letterbox
OK
Next
Finish
OK
-.The.system.will.reboot.after.5.seconds.or.
OK.key.is.pressed.
Notes:
- If set [Disc Auto Playback]to [Off], after you
insert the disc that contains the upgraded
information to upgrade system, you have to start
upgrade from this option of SETUP Menu.
- If the upgrade file package did not pass the
verification, error prompt is displayed , check the
package again (such as the package is not
complete)
- Make sure the firmware version is not an old
version.
- When you upgrade the system using USB Flash
device, you should make a new folder named
UPG_ALL, and copy the upgrade file into this
folder.
[External Memory]
•
External. Memory. would. be. used. in. BD-
Live . function.. When. you. plug. in. the.
TM
USB flash device which has at least 1GB
free. space. to. play. BD-Live™. function,.
the.Blu-ray.Disc™.system.would.make.a
directory.named.BUDA.automatically.
Information will display the Free size.
1..Press.OK.
2..Follow.the.instruction.on.the.TV.
screen.to.select.{Information}.
General Setting
System Screen Save
Language Disc Auto Playback
CEC
Playback
Free size is : 0MB
Disc Auto Upgrade
Security
Load Default
Network
Move cursor key to select menu option
then use "OK " key to select
3.Press OK to select "Erase", the data in
the.BUDA.folder.will.be.cleared.
[Language]
Set.up.the.OSD(On-Screen.Display),.Menu,.
Audio.and.Subtitle.default.language.for.the.
player.
General Setting
OSD
System
Menu
Language
Audio
Playback
Subtitle
Security
Network
Move cursor key to select menu option
then use "OK " key to select
[OSD]
•
Select.the.default.on-screen.display.language.
[Menu]
•
Select.the.default.menu.language.
Off
Information
On
On
On
More...
Erase
RETURN Return
English
English
English
English
SETUP Exit
1