Table of Contents
Advertisement
Thumbnail screen
Video data created on the P2 card in one shooting session is called a clip. When the MCR mode has been
established by the MEDIA switch set to the P2 status, the clips will be displayed on the LCD screen as
thumbnails. (When there is a large number of clips, it will take some time for them to be displayed on the
screen.)
You can perform the following operations using the thumbnail screen.
• Play, repair and delete clips as well as add and delete shot marks.
• Format P2 cards and SD memory cards.
• Load the metadata (shooting information, etc.) from SD memory cards to the unit.
Basic thumbnail screen operations
To use the thumbnail menu:
1
On the thumbnail screen, press the MENU button to display the menu.
2
Select the item using the
button.
If another menu appears, repeat this step.
• To return to the previous screen, select EXIT and press
button.
• To release the menu mode, press MENU.
To select thumbnails: Select the thumbnails (the yellow frame moves) using the
and press the
button (the color of the frame changes to blue-green). Press the
deselect the clip. To scroll the pages, press the PAGE (- or +) button.
To play back clips: Select the thumbnail, and press the
• Only clips whose format is the same as recording format 6 shown in the figure below can be played
back.
1
2
3
4
5
6
THUMBNAIL
ALL CLIP
SAME FORMAT CLIPS
SELECTED CLIPS
MARKED CLIPS
TEXT MEMO CLIPS
SLOT CLIPS
SETUP
EXIT
• Thumbnail screens are not output from the COMPONENT OUT terminal.
and
buttons, and press the
OPERATION
DELETE
FORMAT
REPAIR CLIP
REPAIR CLIP
(LOOP)
EXIT
(or
)
1
or press the
button. (For details on playback, see page 63.)
PROPERTY
META DATA
CLIP PROPERTY
CARD STATUS
DEVICES
PROPERTY SETUP
SYSTEM INFO
EXIT
(Continued on the next page)
P2
2
SET
MENU
PAGE/
AUDIO MON/VAR
and
buttons,
button again to
7
8
LOAD
RECORD
USER CLIP NAME
INITIALIZE
PROPERTY
EXIT
65
Advertisement
Table of Contents
