Table of Contents
Advertisement
Setup menu list (continued)
OTHER FUNCTIONS screen (continued)
Item
POWER SAVE
P2
TAPE
USER FILE
P2
TAPE
HOUR METER
TAPE
OPERATION
P2
118
Display
mode
(Camera) Selects the power-saving mode when the top panel operation keys, DISP/
MODE CHK button, USER1-3 buttons and EVF DTL button have not been
operated for 5 minutes or so.
ON:
The camera-recorder's power is set to OFF.
OFF:
The cylinder head remains stopped without turning off the camera-recorder's
power.
• When connection is made with an external device using the IEEE1394 cable
and the communication mode is established in this way, the power will not be
set off even when none of the above buttons has been operated.
• The power will not be turned off when a P2 card or tape has not been
installed in the P2 mode or TAPE mode, respectively, even if ON has been
selected as this item's setting.
(Camera)
LOAD:
(MCR/
The previous user file settings are loaded.
VCR)
SAVE:
The changed user file settings are saved.
INITIAL:
The user file settings are returned to the factory settings.
After performing LOAD or INITIAL, turn the POWER switch OFF and then
back ON to activate the settings.
• The setting for the TIME ZONE option (page 117) remains unchanged even
when INITIAL is performed.
(Camera)
Displays the total running time (a 5-digit figure per hour) of the cylinder head.
(VCR)
(Camera)
Displays the power-on time (a 5-digit figure).
(MCR)
Description of settings
indicates the factory setting.
Advertisement
Table of Contents
