Panasonic AG-HCK10G Brochure page 5

More Efficient than Tape
Versatile Solid-state Recording Functions
•
Shot mark
To simplify shot selection, you can add a mark to the thumbnail images of
each clip. You can then display and play only the clips that have shot marks.
•
Pre-REC
This helps to ensure you always get the shot you want, by letting you
continuously store, and subsequently record, images and sounds for
3 seconds before the REC button is pressed in standby mode.
* Can be used only when combined with the AG-HCK10G.
•
REC CHECK
Plays back the last 2 seconds of the most recently recorded clip for
quick confirmation.
* Can be used only when combined with the AG-HCK10G.
•
Last clip delete
Only the most recently recorded clip is deleted with this one-touch
function. It can be assigned as a User button function if desired.
•
Meta-data recording
The date, camera operator, location, title and other information can be
added to the image data.
•
LCD REVERSE
The image displayed on the LCD monitor can be reversed vertically and
horizontally to check the angle and recorded image.
* Only the image display is reversed. The recorded image remains in its
original orientation. It can be assigned as the User button if desired.
•
INDEX
Index flags can be added to any desired points in a clip during recording
or playback. Up to 100 index flags can be added to each clip.
Adjust the Image Quality While Watching the Signal Level
Waveform Monitor Display
A horizontal analysis of the input signal's brightness level can be displayed
on the monitor. This lets you adjust the standard black and white levels
while checking the Waveform Monitor (WFM), making it easy to get highly
accurate adjustments.
Easy-to-see LCD
TC
(time-code)
Remaining
Memory
Waveform
Monitor
•
Simplified Display
in Vector Scope
The display can be switched from
waveform monitor (WFM) to vector
scope (VECTOR).
Image with Vector
scope display
Fast Scene Searches
8.9 cm ( 3.5 inch ) LCD Monitor Thumbnail View
Image data is recorded as a file for each
scene. Thumbnail images and file
information are automatically attached to
each file to enable fast, nonlinear access
confirmation and deletion of files
displayed on the LCD monitor.
Meets a Variety of Needs
Convenient Playback Functions
•
Resume Playback
When the Stop key is pressed during playback, the stop position is
stored in memory. Simply press the Play key to start playing again from
the stop position. This feature is especially appreciated when reviewing
long clips.
* Turning off the power resets the memory. This function is disabled in
the factory default setting.
•
Repeat Playback
This function provides repeat clip playback. It is convenient for use in
presentations and demonstrations because playback is seamless, and
there's no need for rewinding. There's also no wear or tear on the
recording media or degradation in the image quality.
* Repeat playback of multiple clips is possible only for clips of the same format.
•
Clip Operation
The AG-HMR10 allows fast forward, fast reverse, clip forward, clip
reverse, and frame by frame playback operation.
On-site Recording and Monitoring
Convenient Recording Functions
•
Time stamp
You can insert time and date information
into the video signal. This could be
convenient, for example, when observing
animals over an extended period, in
certain academic uses, in surveillance,
court reporting, legal depositions or law
enforcement applications.
Remaining
•
TC/UB recording
Battery
Provides a built-in SMPTE time-code
Zoom Number
generator.
Displayed from Z00
to Z99. Handy for
remembering the
angle of view.
05