Adjustments; Camera Section Adjustments; Preparations Before Adjustment (Camera Section); List Of Service Tools - Sony CCD TRV16 - Hi8 Handycam Camcorder Service Manual

5-1.

CAMERA SECTION ADJUSTMENTS

1-1. PREPARATIONS BEFORE ADJUSTMENT
(CAMERA SECTION)

1-1-1. List of Service Tools

• Oscilloscope
• Color monitor
• Adjusting driver • Regulated power supply
Ref. No. Name
J-1 Filter for color temperature correction
(C14)
J-2 ND filter 1.0
ND filter 0.3
J-3 Pattern box PTB-450
J-4 Color bar chart for pattern box
J-5 Adjusting remote commander
(RM-95-remodeled partly) (Note 1)
J-6 Siemens star
J-7 Multi CPC jig
J-8 CPC-7 jig
J-9 Power code (Note 2)
J-10
AFM DEV jig
J-11 Clear chart
J-12 Extension cable (16P, 0.5 mm)
J-13
IR receiver jig
J-14 Extension cable (70P, 0.8 mm)
Note 1: If the micro processor IC in the adjusting remote
commander is not the new micro processor (UPD7503G-
C56-12), the pages cannot be switched. In this case, replace
with the new micro processor (8-759-148-35).
J-1 J-2
J-6 J-7
J-11 J-12
CCD-TR315/TR416/TR416PK/TR516/TR516PK/TR716
CCD-TRV16/TRV16PK/TRV36/TRV36PK/TRV43/TRV46/TRV46PK
SECTION 5

ADJUSTMENTS

• Vectorscope
• Digital voltmeter
Parts Code
J-6080-058-A
J-6080-808-A
J-6080-818-A
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A
J-6082-311-A
J-6082-382-A
J-6082-223-A
J-6082-312-A
J-6080-621-A
J-6082-357-A
J-6082-383-A
J-6082-439-A
J-3
J-8
J-13
Fig. 5-1-1.
Refer to page 3 as Table for distinction
functions of models and classification
Usage
Auto white balance adjustment/check
White balance adjustment/check
White balance check
White balance check
For checking the flange back
For adjusting LCD block
For adjusting the video section and color viewfinder adjustment
For connecting the battery terminal and DC power supply
For adjusting the deviation
For extension between the CD-210/211 board (CN401) and
VC-215 board (CN501)
For adjusting the IR transmitter
For extension between the DD-107 board (CN931) and
VC-215 board (CN915)
Note 2: Connect the adjusting remote commander to the LANC
jack, and set the HOLD switch to the "ADJ" side, or press
the battery switch of the battery terminal using adhesive
tape, etc.
J-4
J-9
J-14
J-5
J-10