22
Getting Started
Turning the camcorder on and getting started
Protecting data on an SD™ Card
Photos or videos cannot be recorded on an SD™ Card when the
card is locked (read only), however photos and videos can be
viewed.
Make sure the lock is in the writeable position before recording
photos and videos as shown below.
Writeable
position
(Sample Illustration) Protecting data on an SD™ Card
Turning the camcorder on and getting started
To turn ON the camcorder, press the Power (
approximately one second.
To record videos: In Record mode, press the Video button. Press it
again to stop recording.
To take a photo: In Record mode, press the Photo button.
To view recorded videos/photos: Press the Playback button.
Turning off the camcorder
Press the Power (
the camcorder OFF.
Write-protected
position
) button for approximately one second to turn
) button for