Table of Contents
Advertisement
Inserting and Removing an SD Card (Optional)
The camcorder comes with an internal memory which allows you to store photos and videos. You can
expand the memory capacity by using an optional SD/SDHC/SDXC memory card.
1.
Insert the memory card into the slot. Please refer to the figure on the right
side.
2.
To remove an installed SD card, press the card inwards to release it.
3.
When the card pops out, gently remove it from its slot.
4.
Recommended memory capacity: 1GB or above.
Note
•
When a memory card is fitted, videos/photos are saved on the card rather than on the built-in
memory.
•
Protecting Data on an SD Card: SD Card is read-only when it is locked. No photos or videos
can be recorded when the SD card is locked. Make sure
the lock is on the writeable position before recording
any media.
11
Writeable
Write-Protected
position
Position
EN
Advertisement
Table of Contents
