Table of Contents
Advertisement
Internal intake 120 mm fans
Just outside of the 3.5" drive bay area are
two fan mounts for 120 mm internal
intake fans.
1. Align your fan with the pegs that
correspond with the fan screw
holes on the fan.
2. Push your fan into the slot until
secure. You will hear your fan
lock into place when the brackets
around the fan snap into place.
23
Align your fan with the pegs that correspond with the fan screw
holes on the fan.
Secure an intake fan into place by aligning it with the pegs that
correspond with the fan screw holes.
Hide quick links:
Advertisement
Table of Contents
