Acer p700 Series Portable Navigator setup
Acer p700 Series Portable Navigator
viii
Acer p700 Series Portable Navigator
Using your new
Unpack, turn on, mount and you're ready to go. Perform the following easy
installation tasks to start using the device straight out of the box:
1.
Unpack the device.
2.
Set up the device in your vehicle.
NOTE: You should not use the power switch again unless you want to do a hard reset. See
"Performing a hard reset" on page 54 for more information. Instead, use the power button
at the top of the device (see diagram below).
setup
for the first time is a snap.