Table of Contents
Advertisement
Using Auto Backup to send videos or photos
You can send videos or photos that you captured with the camcorder to a PC via wireless network.
Installing the program for Auto backup on
your PC
1
Connect the camcorder to a PC with the USB cable.
2
Turn on the camcorder.
The computer recognizes the camcorder and Intelli-studio
•
launches automatically.
3
When the pop-up window for the Auto backup installation
program appears on the PC screen, click OK.
The Auto Backup program is installed on the PC. Follow the on-
•
screen instructions to complete the installation.
4
Remove the USB cable.
5
Connect the camcorder to the PC again with the USB cable.
The camcorder stores information about the PC, so that the
•
camcorder can send files to the PC.
Sending videos or photos to a PC
1
Press the [Home (
2
Touch the
The camcorder will automatically attempt to connect to a WLAN
•
via the most recently connected AP device.
If the camcorder has not previously been connected to a
•
WLAN, it will search for available AP devices. page 72
If your PC is on, the PC recognizes the camcorder and the Auto
•
Backup program launches automatically.
If your PC supports the Wake on LAN (WOL) feature, you can
•
turn on the PC automatically by searching for the PC from your
camcorder. pages 82~83
3
The camcorder will prepare the files and then send them to
the PC.
You cannot select individual files to send. This function only
•
sends files that have been newly stored on the camcorder.
The progress will be shown on the PC monitor.
•
• The camcorder will search for available access points even if you are
connecting to the same access point again.
• If you turn off the camcorder or remove the battery while sending
files, the file transfer will be interrupted.
• While you are using this feature, the buttons on the camcorder will
be disabled.
• You can connect only one camcorder to the PC at a time for sending files.
• The backup may be canceled due to network conditions.
• Videos or photos can be sent to a PC one time only.
• Files cannot be sent again even if you reconnect your camcorder.
81
Wireless network
)] button touch Auto Backup.
tab.
Confirm
Advertisement
Table of Contents
