Troubleshooting
Wireless Network
Message
Icon
-
Connection failed.
No response from
-
server.
Device
-
disconnected.
Initializing Failed.
-
Transfer failed.
-
Informs that...
The camcorder's WLAN configuration does not match
that of the AP. Or it has failed to connect to a device.
No renderer that can be connected to the camcorder
is found in the connected network.
Network connection disconnected while transferring
videos or photos.
The camcorder has failed to locate a TV Link enabled
device.
The camcorder has failed to send videos or photos to
a TV Link device or a smart phone.
Appendixes
Action
• Configure the IP settings (auto or manual) of your
camcorder to match the AP's.
• Try connecting to the device again.
• Check your network connection.
• Select the device and try connecting again.
• Turn on TV Link enabled devices on the network.
• Check the network connection and try again.
113