Troubleshooting; Operation - Maytag MFT2672AEM Use & Care Manual

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked
In the U.S.A., www.maytag.com

Operation

PROBLEM POSSIBLE CAUSES
The refrigerator will Check electrical supply
not operate
Check controls
New installation
Refrigerator control is in Showroom
mode (on some models)
28
T R O U B L E S H O O T I N G
Questions)
to possibly avoid the cost of a service call.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
SOLUTIONS
Plug the power cord into a grounded 3 prong outlet.
Do not use an extension cord.
Make sure there is power to the outlet. Plug in a lamp to see if the
outlet is working.
Reset a tripped circuit breaker. Replace any blown fuses.
NOTE: If problems continue, contact an electrician.
Make sure the controls are turned on. See "Using the Control(s)."
Allow 24 hours following installation for the refrigerator to cool
completely.
NOTE: Adjusting the temperature controls to the coldest setting will
not cool either compartment more quickly.
If the refrigerator is in Showroom mode, cooling is turned off and
"Showroom" will be illuminated on the control panel. See "Using the
Control(s)" for more information.
In Canada, www.maytag.ca