3.1
Basic Operations ................................................................ 3-2
Making Calls ...................................................................... 3-2
Receiving Calls ................................................................... 3-3
3.2
3.3
<Note>
When setting "Idle Line Preference - Outgoing" or "Prime Line
Preference", you cannot access any PT features after going off-hook.
To access PT features, press the INTERCOM button before or after going
off-hook.
If you use a rotary telephone:
It is not possible to access features that have " " or "#" in their feature
numbers except for the features where "0" can be used in place of "#".
When the "Pickup Dialing (Hot Line)" feature is set on your single line
telephone, the dialing sequence should be completed within a
pre-determined time (Pickup Dial Waiting Time - default: 3 s) after lifting
the handset.
To change the time, refer to System Programming in the Installation
Manual.
Refer to Section 4 "Tone List" for tones.
Telephone Features
Contents
Section 3