Panasonic KX-TA30820B User Manual page 190

4
Examples — in Station Programming mode
Display
CID-C Indication
CID-P Indication
CID-C Selection
CID-P Selection
CO-1
Conference
C.W.Tone-1
Ext101: 1234
EXT-123
Function Clear
FWD/DND
Group Log In/Out
Jack01<=>EXT101
Lock Release
Message Waiting
MW- 123
Not Stored
Other CO Key
Pref. In :CO-2
Pref. In :No
Pref. In :Ring
Pref. Out:CO-2
Pref. Out:Idle
Pref. Out:No
RNG:1,2,3
Save Button
Tone Call
TRK GRP-3
Voice Call
0925552111
4-6
Appendix
Appendix
The Caller ID Indication — Common button is assigned.
The Caller ID Indication — Personal button is assigned.
The Caller ID Selection — Common button is assigned.
The Caller ID Selection — Personal button is assigned.
The Single-CO (S-CO) button is assigned.
The Conference (CONF) button is assigned.
Selecting a Call Waiting tone.
Assigned an extension password.
The DSS button is assigned.
Station Programming data can be cleared.
The FWD/DND button is assigned.
The Log-In/Log-Out button is assigned.
Confirming a jack number and extension number.
"Electronic Station Lockout — CANCEL ALL" is set.
Restored the Message Waiting (MESSAGE) button.
The Another Extension Message Waiting button is assigned.
No programming is assigned.
The Other-CO (O-CO) button is assigned.
Selecting a "Prime Line Preference — Incoming".
Selecting a "No Line Preference — Incoming".
Selecting a "Ring Line Preference — Incoming".
Selecting a "Prime Line Preference — Outgoing".
Selecting an "Idle Line Preference — Outgoing".
Selecting a "No Line Preference — Outgoing".
Selecting an "Outside (CO) Line Ringing Selection".
The SAVE button is assigned.
Selecting a Ring-Calling mode.
The Group-CO (G-CO) button is assigned.
Selecting a Voice-Calling mode.
The One-Touch Dialing button is assigned.
Description