Table of Contents
Advertisement
About This Guide
This guide provides site preparation recommendations, instructions for rack mounting the Dell Force10
E600i ExaScale chassis, and instructions for installing the fan tray, power modules, route processor
modules (RPMs), switch fabric modules (SFMs), and line cards.
The E600i system operates on the Dell Force10 Operating System (FTOS) software. After you complete
the hardware installation process and power up the system, refer to the FTOS Configuration Guide for the
E-Series for preliminary software configuration information.
Information Symbols
Table 1-1
describes symbols contained in this guide.
Table 1-1. Information Symbols
Symbol
Warning
Note
Caution
Warning
Related Publications
For more information about the E600i system, refer to the following documents:
• FTOS Configuration Guide for the E-Series
• FTOS Command Reference for the E-Series
• Release Notes for the E-Series and FTOS
Description
This symbol informs you of important operational information.
This symbol informs you that improper handling and installation could result in equipment damage
or loss of data.
This symbol signals information about hardware handling that could result in injury.
1
About This Guide
|
7
Advertisement
Table of Contents
