Setting Up Serial Cable Connections
Serial communication enables the Command Line Interface (CLI) on your PC to
monitor and control the ASUS Storage DS300j unit. The product package
includes a RJ11-to-DB9 serial data cable.
The CLI is explained in ―Chapter 3: Management‖ on page 17.
Figure 6. The serial connector on the back of the ASUS Storage
To set up a serial cable connection:
1.
Attach the RJ11 end of the serial data cable to the RJ11 serial connector on
the controller.
2.
Attach the DB9 end of the serial data cable to a serial port on the Host PC or
Server.
This completes the serial cable connection. Go to ―Connecting the Power‖ on
page 14.
RJ11 Serial Connector
1
3
Chapter 2: ASUS Storage Installation