Asus DS300i Quick Start Manual page 38

ASUS Storage DS300f, DS300i Quick Start Guide
7. Make the needed changes the same as in step 5.
After you have set the last (extreme right) digit, press the
The display says Save Network Setting?
8. Press the
The display shows the new IP address you set.
Making Automatic IP Settings
To make Management Port settings automatically:
1. Press the
2. Press the
If it says Link Status Down, reconnect to the network before preceding.
3. Press the
4. Press the
5. Press the
6. Press the
The display shows the new IP address set by the DHCP server.
This completes the Management Port setup. Go to "Task 10: Creating Logical
Drives with ASUS Storage Management" on page 39.
button to confirm.
or button until the display says Management Port.
button and the display says Link Status Up.
or button and the display says DHCP Disable.
button to make a change.
button to Enable.
button to confirm.
38
button.