Table of Contents
Advertisement
AUTOMATIC NETWORK SETTING
Run the <IP Installer.exe> program and display the camera list found on the screen.
For the initial run, the [Auto Set] and [Manual Set] button are all disabled.
1
Select a camera you want from the
camera list.
Confirm the MAC Address of the camera
on its rear panel.
The [Auto Set] and [Manual Set] button
are activated.
2
Click the [Auto Set] button.
The Auto Set window appears.
The automatically found <IP Address>,
<Subnet Mask>and <Gate Way> are
displayed.
3
Enter your password.
The password is the camera login password
of the root user.
The default password is "4321".
4
Click the [OK] button.
The automatic network setting is finished.
5
The camera automatically restarts when
the network setting is complete.
1
4
2
3
_31
Setting Static IP
Advertisement
Table of Contents
