Setting Up Port Range Forward For Several Network Cameras - Samsung SND-7084R User Manual

network connection and setup

Setting up port range forward for several network cameras

When several network cameras are connected to one Broadband Router device, you
should forward the TCP 943 port of the router to the TCP 943 port of a connected camera.
If you don't set properly the TCP 943 port of the router, you cannot get any video stream from the
`
J
web page of the camera.
• TCP 943 port is a port for the Silverlight policy server of a camera.
• You can set a rule of Port Forwarding on the Broadband Router device through its
configuration web page.
• You cannot change the Silverlight policy server port of a camera.
• You can change the ports of the camera except the policy server port through its
configuration web pages.
When Camera1 and Camera2 are connected to a router :
User
Start End
943 943
3000 3000
3001 3001
4520 4520
4521 4521
8080 8080
8081 8081
Port forwarding can be done without additional router setup if the router supports the UPnP
`
M
(Universal Plug and Play) function.
After connecting the network camera, set <Quick connect> of <Samsung DDNS> to <On> in
the "Setup  Network  DDNS" menu.
62_ network connection and setup

Internet

Broadband Router
Protocol
TCP 192.168.1.100
TCP/UDP 192.168.1.100
TCP/UDP 192.168.1.101
TCP/UDP 192.168.1.100
TCP/UDP 192.168.1.101
TCP/UDP 192.168.1.100
TCP/UDP 192.168.1.101

IP Address

Camera1 (192.168.1.100)
HTTP port 8080
Device port 4520
RTSP port 3000
Policy server port 943
Camera2 (192.168.1.101)
HTTP port 8081
Device port 4521
RTSP port 3001
Policy server port 943