Panasonic AWHE60H Operating Instructions Manual page 33

Basic operations
Camera menu Wireless remote
operation control
With the cursor at
Returning to the
the [Return] position,
previous menu
press the [] button.
With the cursor at the
item to be changed,
press the [] button to
start the item's value
Changing the blinking.
settings Use the [], [], []
and [] buttons to
change the value, and
press the [] button to
enter the change.
While the setting
is blinking, press
Canceling the
the [MENU] button
setting change
quickly (for less than
2 seconds).
Exiting the
Press the [MENU]
camera menu
button for 2 seconds.
operations
Notes
p  Perform the menu operations and exit from the menus using the controller which displayed the Top Menu.
If a menu operation has been performed or a menu has been exited using another controller, first display the Top Menu
and exit from it using one controller, and then display the Top Menu and exit from it using the other controller.
p  The unit uses a different method to operate its menus from the one employed by the convertible cameras (except for the
AW-HE870) and HD integrated cameras which have already been launched onto the market.
For details, refer to the Operating Instructions of the camera concerned.
p  The response speed of the camera differs slightly depending on the controller used.
(continued)
AW‑RP655
With the cursor at the [Return]
position, press the jog dial
(main).
1. Press the jog dial (main) to
start the setting blinking.
2. Turn the jog dial (main) to
change the setting.
3. Press the jog dial (main) to
enter the setting (and stop
the blinking).
While the setting is blinking,
press the jog dial (R).
Press the [MENU] button or
[R/B GAIN/PED] button.
Controller
AW‑RP555
With the cursor at the [Return]
position, press the [ITEM]
button.
1. Press the [ITEM] button to
start the setting blinking.
2. Press the [YES] or [NO]
button to change the setting.
3. Press the [ITEM] button to
enter the setting (and stop
the blinking).
While the setting is blinking,
press the [MENU] button.
Press the [MENU] button for
2 seconds.
AW‑RP50
With the cursor at the [Return]
position, press the F1 dial.
1. Press the F1 dial to start the
setting blinking.
2. Turn the F1 dial to change
the setting.
3. Press the F1 dial to enter
the setting (and stop the
blinking).
—
Press the [CAMERA OSD]
button for 2 seconds.
33