Table of Contents
Advertisement
"MANAGE"
Configure the settings for the administrator and hardware on "MANAGE". Categorized into "COMMON SETTINGS",
"MEDIA MANAGEMENT" and "TURN OFF CAMERA".
"COMMON SETTINGS"
Change the settings of the administrator and camera.
1
2
3
4
5
6
7
1 "CAMERA NAME"
Enter 1 to 15 characters for the camera name
displayed during viewing. (1 byte alphanumeric
characters only)
2 "CHANGE ADMINISTRATOR USER/PASSWORD"
Click the "UPDATE" button on the right to change
the user name and password of the administrator. (
➭ page 16)
3 "CLOCK ADJUST"
Click the "SET" button on the right to set the
internal clock. ( ➭ page 15)
4 "DATE DISPLAY STYLE"
Select "year.month.day", "day.month.year",
or "month.day.year" for the format of the date
displayed during viewing.
In addition, select "12H" (12-hour format) or "24H"
(24-hour format) for the time display.
5 "AUTO POWER OFF"
Select "OFF" or "ON" for the function that turns
off the power automatically if the unit runs with
the battery and no operation is performed for 5
minutes.
6 "UPDATE"
Write the update data on the SD card, and then
click the "EXEC" button to update the firmware. ( ➭
page 57)
7 "FACTORY PRESET"
Click the "EXEC" button to reset all the settings to
factory default. ( ➭ page 56)
46
"MEDIA MANAGEMENT"
Format the SD card.
Advertisement
Table of Contents
