JVC GV-LS2W User Manual page 52

Live streaming camera
Hide thumbs Also See for GV-LS2W:
Table of Contents

Advertisement

Problem
Camera images do not appear./
Camera images are gone.
The pantilter does not work./The
center position of the camera
differs.
52
Check
• Camera images disappear if no operation is
performed for 120 hours. Perform one of the following
so that images reappear:
– Press the shooting button. (Shooting starts.)
– Operate the pantilter.
– Press the reload button.
– Disconnect and then connect the AV cable.
• Do not connect the AV cable to the camera and
pantilter simultaneously.
• Camera images disappear automatically as it cannot
transmit images 12 or more consecutive hours. Press
the reload button to display images.
• Connect the AC adapter to the pantilter. If the adapter
is connected to the camera, the pantilter does not
work.
• Use the supplied LAN cable. Secure it with a stop.
• Be careful not to twist the cable when securing it.
• When the LAN cable is in contact with the floor, etc.,
the pantilter may not work properly due to cable
friction.
• The pantilter may not work properly when placed on
a slant.
• If a mic or the like is attached to the hot shoe, remove
it.
• Before attaching the camera to the pantilter, remove
the battery from the camera.
• Do not touch the camera during position adjustment.
• The center position of the camera may differ slightly
under circumstances such as at low temperatures;
however, this is not malfunction.
Refer to
page 26
page 27
page 27
page 27
page 27
page 30
page 29
page 27
page 27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gv-ls2г

Table of Contents