Troubleshooting Tips; Reset Your Receiver; Reauthorize Your Receiver - DirecTV HR34 User Manual

TROUBLESHOOTING TIPS

RESET YOUR RECEIVER

Many problems can be corrected by performing a simple reset
of the DIRECTV HD DVR. If you experience frozen audio or
®
video, blank screen, or the receiver won't respond to front panel
button or remote control, you can reset your receiver with the
following steps:
Press the red RESET button behind the access card panel
door on the front of the DIRECTV
minutes for program guide information to be acquired.
If you reset a Genie (Adv Whole-Home) Client and the
problem persists, try resetting the Genie HD Receiver.
If the problems persist, try unplugging the power cord of the
DIRECTV Receiver for 15 seconds, then plug it in again.

REAUTHORIZE YOUR RECEIVER

If your receiver displayed the message "722 - Service Expired,"
try reauthorizing your receiver. On a computer, go to
directv.com/reauthorize and follow the onscreen instructions.
You will need to be logged into your account on directv.com to
complete this process.
Running the System Test (at the end of this section) can also
help you diagnose and solve many common problems. Note
that resetting your receiver twice in a row will clear all your
program guide data. It could take as much as 48 hours to
reacquire all of it.
102
HD DVR, then wait a few
®
Reset Button
(Your equipment may not look exactly like the model illustrated.)