Table Of Contents - Viking BVGRC8366BWSS Installation Manual

Table of Contents

Warnings & Important Safety Instructions _______________________________________________3
Dimensions _________________________________________________________________________6
Specifications _______________________________________________________________________8
Clearance Dimensions (Proximity to Cabinets) ___________________________________________9
Clearance Dimensions (Wood/Composite Overlay) _____________________________________10
Electrical & Gas Requirements _______________________________________________________11
General Information ________________________________________________________________13
Installation _________________________________________________________________________14
Door Removal __________________________________________________________________14
Leg Installation _________________________________________________________________15
Kickplate Installation ____________________________________________________________15
Leveling/Adjustments/Alignment _________________________________________________16
Anti-tip Device Installation _______________________________________________________17
Connecting Gas & Electric _______________________________________________________18
Standoff Spacer Removal ________________________________________________________19
Final Installation ________________________________________________________________19
Door Replacement and Adjustment _______________________________________________20
Final Preparation ___________________________________________________________________21
Performance Checklist ______________________________________________________________21
Service & Registration_______________________________________________________________22
2
IMPORTANT-
Read and Follow!
• Before beginning, please read these
instructions completely and carefully.
• DO NOT remove permanently affixed
labels, warnings, or plates from product.
This may void the warranty.
• All local and national codes and ordinances
must be observed. Installation must
conform with local codes or in the absence
of codes, the National Fuel Gas Code ANSI
Z223.1 INFPA54.
• The installer must leave these instructions
with the consumer who should retain for
local inspector's use and for future
reference.
In Canada: Installation must be in accordance
with the current CAN/CGA B149.1 & 2 Gas
Installation codes and/or local codes. Electrical
installation must be in accordance with the
current CSA C22.1 Canadian Electrical Codes
Part 1 and/or local codes.
In Massachusetts: All gas products must be
installed by a "Massachusetts" licensed
plumber or gasfitter. A "T" type handle
manual valve must be installed in the gas
supply line to the appliance.
An air curtain or other overhead range hood
which operates by blowing a downward
airflow onto the range, shall not be used with
a gas range
3
Your safety and the safety of others is
very important.
We have provided many important safety
messages in this manual and on your
appliance. ALWAYS read and obey all
safety messages.
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
All safety messages will be preceded by
the safety alert symbol and the word
"DANGER," "WARNING" or "CAUTION."
These words mean:
DANGER
Hazards or unsafe practices
which WILL result in severe personal
injury or death.
WARNING
Hazards or unsafe practices
which COULD result in severe personal
injury or death.
CAUTION
Hazards or unsafe practices which
COULD result in minor personal injury or
property damage.
All safety messages will identify the
hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
the instructions are not followed.