Amana AGG200AAW Installation Instructions Manual
Amana AGG200AAW Installation Instructions Manual

Amana AGG200AAW Installation Instructions Manual

20" (50.8 cm) freestanding gas range with standard clean oven
Hide thumbs Also See for AGG200AAW:

Advertisement

20" (50.8 CM) FREESTANDING GAS RANGE
IMPORTANT:
Save for local inspector's use.
Installer: Leave installation instructions with the homeowner.
Homeowner: Keep installation instructions for future reference.
W10531342A
INSTALLATION INSTRUCTIONS
with Standard Clean Oven

Table of Contents

RANGE SAFETY............................................................................. 2
INSTALLATION REQUIREMENTS ............................................... 4
Tools and Parts............................................................................ 4
Location Requirements ............................................................... 4
Electrical Requirements............................................................... 5
Gas Supply Requirements .......................................................... 6
INSTALLATION INSTRUCTIONS ................................................. 7
Unpack Range............................................................................. 7
Install Anti-Tip Bracket ................................................................ 7
Make Gas Connection................................................................. 8
Level Range ............................................................................... 10
Installing/Replacing the Battery ................................................ 10
Battery Status Indicator............................................................. 11
Electronic Ignition System......................................................... 11
Complete Installation................................................................. 13
GAS CONVERSIONS ................................................................... 14
LP Gas Conversion.................................................................... 14
Complete Conversion................................................................ 16
Natural Gas Conversion ............................................................ 16
Complete Conversion................................................................ 18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AGG200AAW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Amana AGG200AAW

  • Page 1: Table Of Contents

    INSTALLATION INSTRUCTIONS 20" (50.8 CM) FREESTANDING GAS RANGE with Standard Clean Oven Table of Contents RANGE SAFETY................2 INSTALLATION REQUIREMENTS ..........4 Tools and Parts................4 Location Requirements ............... 4 Electrical Requirements............... 5 Gas Supply Requirements ............6 INSTALLATION INSTRUCTIONS ..........7 Unpack Range................
  • Page 2: Range Safety

    RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”...
  • Page 3 In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet.
  • Page 4: Installation Requirements

    INSTALLATION REQUIREMENTS Tools and Parts Location Requirements Gather the required tools and parts before starting installation. IMPORTANT: Observe all governing codes and ordinances. Do Read and follow the instructions provided with any tools listed not obstruct flow of combustion and ventilation air. here.
  • Page 5: Electrical Requirements

    Mobile Home - Additional Installation Requirements Cabinet Dimensions The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 Cabinet opening dimensions shown are for 25" (64.0 cm) (formerly the Federal Standard for Mobile Home Construction countertop depth, 24"...
  • Page 6: Gas Supply Requirements

    Gas Supply Requirements Flexible metal appliance connector: WARNING If local codes permit, a new CSA design-certified, 4-5 ft (122-152.4 cm) long, ½" (1.3 cm) or ¾" (1.9 cm) I.D., flexible metal appliance connector may be used for connecting range to the gas supply line. A ½"...
  • Page 7: Installation Instructions

    Line pressure testing above ½ psi gauge (14" WCP) Burner Input Requirements The range and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of Input ratings shown on the model/serial rating plate are for that system at test pressures in excess of ½...
  • Page 8: Make Gas Connection

    3. Determine and mark centerline of the cutout space. The mounting can be installed on either the left side or right side Make Gas Connection of the cutout. Position mounting bracket against the wall in the cutout so that the V-notch of the bracket is 7 " (20 cm) WARNING from centerline as shown.
  • Page 9: Verify Anti-Tip Bracket Is Installed And Engaged

    3. Use a combination wrench and pliers to attach the flexible 6. Remove cooktop burner caps and grates from parts connector to the adapters. Check that connector is not package. Align notches in burner caps with pins in burner kinked. base.
  • Page 10: Level Range

    6. Repeat steps 1 and 2 to ensure that the range foot is engaged in the anti-tip bracket. If the rear of the range lifts more than ½" (1.3 cm) off the floor without resistance, the anti-tip bracket may not be installed correctly.
  • Page 11: Battery Status Indicator

    4. Remove the battery holder and insert a new 9V DC alkaline Test the battery by lighting a burner. See “Electronic Ignition battery into it. System” section. The electrode in each burner will spark and make a clicking noise. When the battery needs to be replaced, follow these instructions and remove the old battery before inserting a new battery.
  • Page 12 Check Operation of Cooktop Burners Check Operation of Oven/Broil Burner 1. If control panel and knobs were removed earlier, reinstall 1. Open the oven door knobs. 2. Press in and turn the oven control knob to the “LITE” position 2. Push in and turn each surface unit control knob to the “LITE” position.
  • Page 13: Complete Installation

    6. When the flame has been properly adjusted, turn the oven off If range does not operate, check the following: and wait for the burner to cool down. 9V DC alkaline battery is installed correctly. 7. Tighten the shutter screw. 9V DC alkaline battery is not defective or discharged.
  • Page 14: Gas Conversions

    GAS CONVERSIONS WARNING LP Gas Conversion WARNING Explosion Hazard Use a new CSA International approved gas supply line. Install a shut-off valve. Securely tighten all gas connections. Tip Over Hazard If connected to LP, have a qualified person make sure A child or adult can tip the range and be killed.
  • Page 15 4. Remove the cap from the gas pressure regulator using a 4. Install LP gas orifice spuds using a 7 mm combination flat-blade screwdriver. wrench. NOTE: Do not remove the spring beneath the cap. A. Cap 5. Turn the cap over so the LP is visible. A.
  • Page 16: Complete Conversion

    To Convert Oven Burner Natural Gas Conversion 1. Open the oven door and remove oven racks, oven tray and WARNING flame spreader and set aside. 2. Lift oven burner. The orifice spud is behind the oven burner air shutter. Tip Over Hazard A child or adult can tip the range and be killed.
  • Page 17 4. Remove the cap from the gas pressure regulator using a 4. Install the Natural gas orifice spuds using a 7 mm flat-blade screwdriver. combination wrench. NOTE: Do not remove the spring beneath the cap. A. Cap 5. Turn the cap over so that N or NAT is visible. A.
  • Page 18: Complete Conversion

    To Convert Oven Burner Complete Conversion 1. Refer to the “Make Gas Connection” section for properly 1. Open the oven door and remove oven racks, oven tray, and connecting the range to the gas supply. flame spreader and set aside. 2.
  • Page 19 Notes...
  • Page 20 W10531342A © 2012 Whirlpool Corporation. 9/12 All rights reserved. Printed in Mexico...

This manual is also suitable for:

Agg200aa

Table of Contents