INSTALLATION To optimize the performance of your AMAIRCARE HEPA AIR FILTRATION SYSTEM, it should be installed by a pro- fessional heating and ventilation contractor who is familiar with your indoor air quality situation and the operation of other heating, ventilation and air condi- tioning equipment that you may have.
HEPA filter by removing it and seeing if the filter paper is darkened on the inlet or outer side. If it is, the filter cartridge should be replaced. Please contact your local Amaircare dealer or call Americair Corporation Customer Service Department at (905) 565-9488 regarding replace- ment of filter media, warranty information or if you have any questions or con- cerns about the performance of your AMAIRCARE Air Filtration System.
OPERATING INSRUCTIONS With proper care and maintenance, you will enjoy many years of service and dramatically improve the quality of your indoor air. The AMAIRCARE HEPA Air Filtration System is designed to operate continuously and the unit should be left in operation at all times.
FILTER REPLACEMENT INSTRUCTIONS The AMAIRCARE HEPA Air Filtration System is designed to run continuous- ly. To ensure optimal performance, please carefully follow the Product Information and Owner’s Manual Instructions. FILTER REPLACEMENT INSTRUCIONS: 1. Read these instructions completely. 2. Unplug your unit from the power supply outlet. 3.
FILTER MEDIA There are three stages of filtration in the AMAIRCARE Air Filtration System. Air is drawn into the top of the unit through the duct opening above the front compartment and is exhausted through the duct opening above the rear fan compartment.
AMERICAIR CORPORATION - PARTS LIST The following are the item numbers for the various filter replacement components needed to ensure long-term optimum performance from your AMAIRCARE HEPA Air Filtration System. To order, please contact your Dealer directly or call the fac- tory to obtain the name of the Dealer nearest to your location.
SPECIFICATIONS The Amaircare Models 4000V, 5000V, 6500, 8500, and 10000 HEPA Air Filtration Systems are designed for indoor air quality improvement situations where high capacity is required. Following are the specifications for these five models: MODEL 4000V HEPA AIR FILTRATION SYSTEM Capacity: Air Flow - 50 cubic feet - 300 cubic feet/max.