Amaircare 2500 Instructions

Filter change

Amaircare 2500, 3000 Filter Change Instructions

Step 1. Opening the cabinet

1. Turn the unit off and unplug it.

2. Unscrew the 5 lid screws. Once all five

screws are out, remove the metal cover.

1. Lift the complete filter cartridge assembly

from the unit. Remove and discard the carbon

prefilter.

2. Wrap the new prefilter around the HEPA

cartridge completely enclosing it. Use the 3

butterfly clips provided to hold the filter

tightly around the HEPA cartridge.

3. Put the filter cartridge back in the unit.

1. Remove and carefully discard the old HEPA cartridge.

2. Insert a new HEPA cartridge, complete with new Pre-filter and Inner Blanket.

3. Place a new O-ring seal in the outer groove in the top of the HEPA cartridge. If the O-ring

appears too big, pinch it in several places until it fits in the groove.

Table of Contents

Do you have a question about the 2500 and is the answer not in the manual?

Page 1 Amaircare 2500, 3000 Filter Change Instructions Step 1. Opening the cabinet 1. Turn the unit off and unplug it. 2. Unscrew the 5 lid screws. Once all five screws are out, remove the metal cover. Step 2. Pre-filter 1. Lift the complete filter cartridge assembly from the unit.
Page 2 Step 4. Inner Blanket 1. Fold the ends of the old Inner Blanket in and remove it from the unit. 2. Insert the new Inner Blanket inside the HEPA filter with the edges overlapped by at least one inch. Once it is in position press the Inner Blanket tightly against the inner screen until the ends butt together.

3000