Outside Top Exhaust (Vertical Duct); Check; Adaptor And Proper Damper Operation Check; A2. Adjust The Exhaust Adaptor - Samsung SMH2117S/XAA Installation Instructions Manual

Step-by-step installation guide
A. OUTSIDE TOP EXHAUST
(VERTICAL DUCT)
A1. INSTALLATION PROCEDURE
FOR EXHAUST ADAPTOR AND
PROPER DAMPER OPERATION

CHECK

The exhaust Adaptor and Damper are
shipped assembled and attached to
the filler-upper.
1. Slide the exhaust adaptor as shown in the
diagram above.
2. Make sure tape securing the damper is
removed and damper pivots easily before you
mount the microwave.
CAUTION: You will need to make adjustments to
assure proper alignment with your house exhaust
duct after the microwave is installed.
A2. ADjUST THE EXHAUST ADAPTOR
After you have installed the microwave, you will
need to open the top cabinet and adjust the exhaust
adaptor so that you can connect it to the house
duct.
Damper
Blower Plate Damper
Blower Plate
SMH1816_XAA-DE68-03943A-02-EN_120725.indd 12
Back of Back of
Microwave
Microwave
For Front-to-Back
For Front-to-Back
Adjustment, Slide the
or Side-to-Side Adjustment,
Exhaust Adaptor as Needed Slide the Exhaust
Adaptor as Needed
NOTE: You must attach the house duct to the
exhaust adaptor after installation is complete.
B. RECIRCULATING (NON-VENTED
DUCTLESS)
B1. ADAPTING THE mICROWAVE
BLOWER FOR RECIRCULATION
1. Remove and save the screws
that hold the blower plate to the
microwave.
2. Lift up the
blower plate.
NOTE: The exhaust adaptor with the damper is not
needed for recirculating models. You may want to
save them for possible future use.
12
House Duct
House Duct
Back of
Microwave
2012-07-25 7:49:16
3.
C
bl
of
pl
4.