Tools You Will Need; Mounting Space - Samsung SMH2117S/XAA Installation Instructions Manual

TOOLS YOU WILL NEED
# 1 and #2 Phillips
screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Level
mOUNTING SPACE
12˝ max.
16 ½˝
30˝ min.
30˝
5˝
SMH1816_XAA-DE68-03943A-02-EN_120725.indd 7
Pencil Ruler or tape measure and
Scissors (to cut Electric drill with
template, if necessary)
Saw (saber, hole or
keyhole)
Duct and masking tape
NOTES:
Bottom edge of the
cabinet needs to be 30˝ • The space between the cabinets must be 30˝ wide and
or more from the cooking
surface.
• This microwave oven is for installation over ranges up
• If you are going to vent your microwave oven to the
Backsplash
• If installing the microwave oven beneath smooth
• maximum cabinet depth above and beside the
• The dimensions provided are the minimum
General information
straight edge
/ ˝, ½˝ and
3
16
⅝˝ drill bits
Stud finder or Hammer
(optional)
free of obstructions.
to 36˝ wide.
outside, see the Hood Exhaust Section for exhaust
duct preparation.
flat cabinets, be careful to follow the instructions
on the top cabinet template for power cord
clearance.
unit is 12˝.
required for mounting the microwave oven. Local
codes and the practical use of the range will
likely require you to provide more than the 13.5˝
shown between the range and the bottom of the
microwave.
7
Carpenter square (optional)
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)
Safety goggles
2012-07-25 7:49:13