Motorola MOTO Q 9c User Manual page 72

• The incoming server address and whether the
incoming server requires an SSL connection
• The outgoing server address and whether the
outgoing server requires authentication
• For a small number of POP3 and IMAP4 e-mail
providers, a domain name
1 Press the Messaging key (
2 Scroll to Setup E-Mail and press the center
s
select key ( ).
3 Enter your e-mail address and password, and
press the right soft key (
4 Ensure that the Try to get e-mail settings from the Internet
check box is not selected, and press the right soft
+
key ( ) (Next).
5 Select Internet e-mail, Exchange server, or Custom domain
depending on your type of e-mail account and
press the right soft key (
70 e-mail & messages
).
+
) (Next).
+
) (Next).
6 Enter your name as you want it to appear in your
e-mail messages. You can also change the
account name as it will appear on your device.
Press the right soft key (
7 Enter your Incoming mail server, and select your Account
type (POP3 or IMAP4). Press the right soft key
+
( ) (Next).
8 Enter your e-mail user name and password (if it is
not already filled in). You also have the option to
select or deselect the Save password check box.
Then press the right soft key (
9 Enter your outgoing server information. Select
the Outgoing server requires authentication and Use the same name
and password for sending e-mail check boxes if
required by your e-mail provider. Then press the
+
right soft key (
10 Select how often you want your device to check
for messages automatically, or if you want to
check manually, and then press the right soft key
+
) (Next).
+
) (Next).
) (Next).